Serpent 710
10-12-2004 | 10:18 AM
Suspended
Joined: May 2004
Posts: 589
From: HOUSTON,TEXAS
Originally posted by jag
I was told by someone at Serpent USA that it is a cost issue. The Hudy parts are too expensive... that's what he told me. Also, they have no Hudy/Serpent parts or Hudy tools at all. They told me that they sent all of the tools back when they split. Maybe they sent all of the parts back as well? Anyway, it doesn't sound good. They are now selling the 3Racing stuff.
I was told by someone at Serpent USA that it is a cost issue. The Hudy parts are too expensive... that's what he told me. Also, they have no Hudy/Serpent parts or Hudy tools at all. They told me that they sent all of the tools back when they split. Maybe they sent all of the parts back as well? Anyway, it doesn't sound good. They are now selling the 3Racing stuff.
10-12-2004 | 10:32 AM
Those pin mounts look like production parts....and I'll second what redsand said about the reactive caster mounts on the Evo2 Xray....they dramatically change the corner attitude of the car. How is the turn-in and on-throttle steering on the 710 with the default setup?
10-12-2004 | 12:35 PM
Tech Addict
Joined: Dec 2002
Posts: 536
From: Planet earth
Titanium screw set for 710
10-12-2004 | 01:39 PM
Tech Elite
Joined: Dec 2003
Posts: 4,104
From: Va Va Voom!
Re: Titanium screw set for 710
Originally posted by border r/c
Titanium screw set for 710
complete set
http://shop.the-border.nl/customer/p...66&cat=&page=1
Titanium screw set for 710
complete set
http://shop.the-border.nl/customer/p...66&cat=&page=1
10-12-2004 | 01:40 PM
Tech Elite
Joined: Dec 2003
Posts: 4,104
From: Va Va Voom!
Re: FRONT/REAR ALUM POSTS FOR 710
Originally posted by SERPENTFREAK69
ARE THESE GOOD TO HAVE?SOME PEOPLE I TALKED TO SAYS ITS A WASTE OF MONEY WHILE THE OTHER GROUP SAID ITS A GOOD IDEA...ANY OPINIONS?CHOCO
ARE THESE GOOD TO HAVE?SOME PEOPLE I TALKED TO SAYS ITS A WASTE OF MONEY WHILE THE OTHER GROUP SAID ITS A GOOD IDEA...ANY OPINIONS?CHOCO
10-12-2004 | 01:44 PM
Tech Elite
Joined: Dec 2003
Posts: 4,104
From: Va Va Voom!
Originally posted by SMcpot
Those pin mounts look like production parts....and I'll second what redsand said about the reactive caster mounts on the Evo2 Xray....they dramatically change the corner attitude of the car. How is the turn-in and on-throttle steering on the 710 with the default setup?
Those pin mounts look like production parts....and I'll second what redsand said about the reactive caster mounts on the Evo2 Xray....they dramatically change the corner attitude of the car. How is the turn-in and on-throttle steering on the 710 with the default setup?
10-12-2004 | 01:45 PM
Tech Regular
Joined: Jul 2004
Posts: 268
From: scranton, pa
Re: FRONT/REAR ALUM POSTS FOR 710
Originally posted by SERPENTFREAK69
ARE THESE GOOD TO HAVE?SOME PEOPLE I TALKED TO SAYS ITS A WASTE OF MONEY WHILE THE OTHER GROUP SAID ITS A GOOD IDEA...ANY OPINIONS?CHOCO
ARE THESE GOOD TO HAVE?SOME PEOPLE I TALKED TO SAYS ITS A WASTE OF MONEY WHILE THE OTHER GROUP SAID ITS A GOOD IDEA...ANY OPINIONS?CHOCO
10-12-2004 | 08:08 PM
Tech Prophet
Joined: Feb 2002
Posts: 19,679
From: MORDOR
Originally posted by Sow&Steady
Julius, I think you're right about it possibly being an experiment. If you go to 3hobby.com and then in the Forum Center, click on "IFMAR 1:10 IC World Championship", there's a picture of Michael working on his car and the orange top block is NOT on his car!
Julius, I think you're right about it possibly being an experiment. If you go to 3hobby.com and then in the Forum Center, click on "IFMAR 1:10 IC World Championship", there's a picture of Michael working on his car and the orange top block is NOT on his car!
That's the result of plagiarising without reading the caption below what the original poster (Mike Myers) mentioned...
That's Mauro Marque's son's car (Mauricio, who is one of the local Brazillain racers there) that Michael Salven is working on. Mike Myers happens to stay at Mauro's house.
10-12-2004 | 09:42 PM
Tech Elite
Joined: Jan 2003
Posts: 4,069
From: Nuremberg, Germany
Originally posted by InitialD
That's the result of plagiarising without reading the caption below what the original poster (Mike Myers) mentioned...
That's Mauro Marque's son's car (Mauricio, who is one of the local Brazillain racers there) that Michael Salven is working on. Mike Myers happens to stay at Mauro's house.
That's the result of plagiarising without reading the caption below what the original poster (Mike Myers) mentioned... That's Mauro Marque's son's car (Mauricio, who is one of the local Brazillain racers there) that Michael Salven is working on. Mike Myers happens to stay at Mauro's house.
engine
10-12-2004 | 10:01 PM
Tech Elite
Joined: Jan 2003
Posts: 4,069
From: Nuremberg, Germany
Re: engine
Originally posted by buboy28
guys, what engine does michael salven is using at the worlds?
thanks
guys, what engine does michael salven is using at the worlds?
thanks
10-12-2004 | 11:44 PM
Tech Regular
Joined: Nov 2003
Posts: 251
Re: Titanium screw set for 710
Originally posted by border r/c
Titanium screw set for 710
complete set
http://shop.the-border.nl/customer/p...66&cat=&page=1
Titanium screw set for 710
complete set
http://shop.the-border.nl/customer/p...66&cat=&page=1
If you want to lighten your car I would use the Alu screws made by Serpent.
I have them all over my car and they are stronger then the steel one's.
Bye, Thomas