xxx-nt or xxx-t shock, thankyou. i asked him a few times but he bought the shocks on ebay and couldnt tell me what they came off of. i found a few sets on ebay

Ya I've noticed alot of bind with the stock axle spacer and drive pin. Seems the backspacing of the rim as it seets into yhe axle pin puts pressure on the bearings reducing wheel spin. Thats the main reason reason I was wondering about the 12mm hubs

im reluctant to use anything losi but i suppose i will give it a shot anyway.
thanks

Do all of the 4 companys rims interchange? Like can the slash rims fit on the sc10 vise versa?

NO, AE is there own world, Traxxas is different front to rear and 12 mm, HPI is nearly the same as Slash rears, OFNA Hyper10 are 1mm less offset than slash rears/HPI's. I haven't measured Losi wheels but they are 12MM too.

Damnit, I really like a set of Slash wheels and can't seem to find them specifically for sc10.

I've been running them since I built my kit. Got plenty of races on them. I run 8.5 brushless so I needed the truck to track straight under hard accel. I'd pick up 2 sets just in case, but I haven't cracked/broken mine yet and I've side swiped the wall and some trucks plenty. Also, I added 3 oz. in the rear and 1.5 oz. in the front. That's just what I did, add .5 oz. at a time and see what that does for you until you get it dialed the way you want. :deathstar

Has anyone used boca's orange sealed ceramic bearings on a build, and how big of a difference was noticed?

I use the yellow seal ceramic hybrid in my 10.5 motor. well worth the $15 each. not had a problem since

What a PAIN in the butt to clean
 

Track wasn't as dry as we thought :sneaky:

http://i681.photobucket.com/albums/v...gs-gtp/201.jpg
http://i681.photobucket.com/albums/v...gs-gtp/202.jpg
http://i681.photobucket.com/albums/v...gs-gtp/203.jpg

Wow!!

Deputy...I found a sweet mod to keep most of the inside dry...I used an old b4 body as a undertray...now that I am putting it into words I just remembered that Jconcepts has one out...Ill post pics if I can remember...

GOT DIRT?
 

this was only after 1 qualifer & 2 more togo with the race...lol
thank you Jconcepets for coming out with a cover...lol

Im almost sure there off a xxx-nt Ad2/Mf2 from the looks, but could be wrong. I would look at his shocks again next time and match them up and see what they are.