And are they the 22 Fronts for the fronts, Rears for the Rears? We both mean 22T right? Although I guess it doesn't matter, since I don't see 22, only 22t

Everything's backordered but I'm just trying to accumulate a proper pitbox for this new FT

Front
3.5 green
3.2 silver
2.9 orange
2.5 red
2.3 pink

Rear
2.0 yellow
1.8 white
1.6 grey

Is all I can find. I really appreciate any help. I'm not a Losi guy, so if something's not labeled correctly, (notorious Horizon Hobby) I believe it.

Do you know if these are the diameter?
http://www.horizonhobby.com/products...t-ten-LOSB2963
http://www.horizonhobby.com/products...t-ten-LOSB2959
Or did they bigbore the 22's like I think they did?

They are the 22 buggy springs for the rear, and 22 buggy springs for the fronts (on the b4.1) I only use the rear springs on my SC10. I cant seem to find any 22T front springs, but my fronts don't rub so I am using AE front springs.

These are from AMain
http://www.amainhobbies.com/product_...te-Pink-TLR-22

This is what I use on the rear of my SC10.

I hate to break it to you, but thats a B4.1.

I know it's a b4. lol.

Thanks Jerz. Looks like i'm going to be piecing together a Spring kit or just sticking with what someone's opinion is. It's only being ran indoor at a Local Track. ( PRCR ) super tight, super Sticky.

when you replace the o-rings, try the kyosho x ring for rb5 or trinity sells some that are the same but cheaper. i have a set but have not used them yet. with the kyosho o-rings it just about eliminate's the typical ae oil leaks. i have ran my shocks for three months now with no major leaks at all. i just replace the oil every so often and im good to go.

They are great springs.. I love them on my B4.1, and they worked well on my sc10. no binding at all. My fronts never rubbed so i am sticking with the AE ones for the front.

I'm OCD and could never have different springs on front over rear. I'm go crazy.

Thanks alot for the help. Gonna try to get this rolling.

Little rubbing of the springs is not that big of a deal... Let them rub sooner or later they will wear themselves out... Do you think the AE sponsored guys are putting losi suspension parts on there SC10's?

Actually. It's a big deal.

Yep

Oh, I can. If it works better (lower lap times), it always looks better to me, and if it doesn't, I'll get over it.

:rolleyes:

Now that you mention it...

Up and coming AE sponsored driver Brian Kinwald's truck a couple months ago:

http://events.redrc.net/wp-content/g...waldsc10-2.jpg

Kurt Wenger, AE sponsored guy's B4.1 last week:

http://c29494.r94.cf1.rackcdn.com/wp...-bellcrank.jpg

And welcome to RCTech, home of bad tech! You'll fit right in.

Noticing here... Is BK using 4x4 Tie Rod ends on his 2x4? Those look just like them.

Thanks for the welcome... I appreciate it...

But according to http://www.teamassociated.com/setupsheets/SC10/
all their drivers are using AE springs but who knows maybe there lying about there setups...