R/C Tech Forums - SC10 Thread

i would love for you to drive mine and see what you think. Then i can help you adjust yours to your driving.

cuz lets face it....not every setup works for every driver.

when do you go to hot rod?

Tuesday the 20th will be my next time out, unless dirt bike plans fall through on the 17th.

I have the purple and orange trucks.

balistic

10-09-2009 10:50 AM

Quote:

Originally Posted by xraysteve (Post 6448727)

is anyone using the rpm gt2 rear arms. I got a set but it looks like you have to put the left arm on the right and the right side on the left. So the shocks fit or am I just crazy.

I used the AE parts and cut the shock mounts off and drilled a hole in the arm to mount the shock. you could do the same with RPM arms.

Pimpin

10-09-2009 11:21 AM

Quote:

Originally Posted by balistic (Post 6451464)

Tuesday the 20th will be my next time out, unless dirt bike plans fall through on the 17th.

I have the purple and orange trucks.

Ok I think that's a Tuesday. We usually moto at milestone mx on those nights but I'll try to make it out.

I have the all white truck with black factory motorsports stickers.

z50king

10-09-2009 11:24 AM

I got bowties!!

rcman1993

10-09-2009 03:38 PM

Quote:

Originally Posted by tom_chang79 (Post 6449340)

It's all in the tires. No amount of suspension compensation can compensate treads... Also, can't expect these things to handle like a T4. It's based off a T4, but the CORR style tires are drastically different...

Speaking of tires (and wheels):

How are the Proline Split-Six? Was thinking about getting a pre-mounted Proline Split-Six Bowtie for my SC10. Is the part of the rim where it mates with the axles for the rear rims beefy (meaning, the drive pins will not tear it up like the original SC10 rear rims)?

Anyone have a pic of the INSIDE of the rear rims of the Split Six? All I can find are the outside pics...

traction is traction, they just grip better on the sc.

xraysteve

10-09-2009 06:28 PM

What do you do to change rear toe and what do you run. I was thinking like 3degree toe in. What is the stock setting. Where could I find set up sheets.

rcman1993

10-09-2009 06:30 PM

Quote:

Originally Posted by xraysteve (Post 6452961)

What do you do to change rear toe and what do you run. I was thinking like 3degree toe in. What is the stock setting. Where could I find set up sheets.

stock should be 0 to .5

whipnet

10-09-2009 07:21 PM

I picked up one of those STRC battery straps and gained some weight lost to using lipo. Great solid piece.

STRC Battery Strap for SC10 #9814s <-- See info here

*

Fabulous

10-09-2009 10:00 PM

Quote:

Originally Posted by xraysteve (Post 6452961)

What do you do to change rear toe and what do you run. I was thinking like 3degree toe in. What is the stock setting. Where could I find set up sheets.

This is what I am running in my T4. Just ordered another 'steel' one for the SC10. Adds 1 degree toe in and has 1 degree anti squat built in. The steel one adds more weight to tghe rear also.
http://www.rctech.net/forum/r-c-item...ok-inside.html

trdsupra88

10-10-2009 01:41 AM

Sc10 is 3* stock rear toe...

tom_chang79

10-10-2009 04:24 AM

Quote:

Originally Posted by tom_chang79 (Post 6429725)

I have a question. What size bearings do you need to replace those bushing used in the steering cranks? I'd like to replace those copper bushings with some good bearings to prevent the buildup of slop that will eventually happen from wear...

Anyone?

Pimpin

10-10-2009 06:21 AM

Quote:

Originally Posted by tom_chang79 (Post 6454367)

Anyone?

1/8" x 1/4"

speeddaddy

10-10-2009 06:25 AM

Quote:

Originally Posted by tom_chang79 (Post 6454367)

Anyone?

You can get them at ( WWW.AVIDRC.COM) They are1/8x1/4 Metal.( Part # R144ZZ). All there bearing are only 1 dollar each, best price any where. I've been buying from them for a long time. Guys I race with told me about this place

xraysteve

10-10-2009 10:26 AM

Avid is a great deal. I am still putting my kit together and no the RPM gt2 rear arms don't fit and the front RPM gt2 arm work but you have to buy smaller hinge pinns. And if you are almost done building and you get to the shock build step make sure you leave like a hour extra for just trying to get the shock caps to thread on straight.

balistic

10-10-2009 12:09 PM

Quote:

Originally Posted by trdsupra88 (Post 6454195)

Sc10 is 3* stock rear toe...

where are you getting that number from?

All times are GMT -7. It is currently 08:53 AM.

Page 191 of 809