Go Back  R/C Tech Forums > General Forums > Radio and Electronics
Speed Passion Thread >

Speed Passion Thread

Community
Wiki Posts
Search
Like Tree4Likes

Speed Passion Thread

Thread Tools
 
Search this Thread
 
Old 01-09-2013 | 11:52 AM
  #2761  
WarTrader's Avatar
Tech Apprentice
iTrader: (7)
 
Joined: Apr 2012
Posts: 65
From: At a Track In Illinois Hopefully
Default

Originally Posted by 66Racer
Thanks. I read in here that apperently its the same as the gt2.0 pro without the need for a voltage booster and with a lp heatsink. I'm guessing 17.5 2wd no boost won't hurt the gt 2.1ex as long as temps are ok. I would rather sell it than abuse it though.

Any other comments regarding the gt 2.1ex in 2wd buggy mod/stock will be appriciated.

I've run one in the past without issue. I do run Blinky 17.5 with minimal timing with lower gear ratios. Mind you I've run it in a pretty light 22 on a very tight, high bite track that gives little chance to really run wide open for very long.
WarTrader is offline  
Old 01-09-2013 | 11:48 PM
  #2762  
1mrdad's Avatar
Tech Regular
iTrader: (48)
 
Joined: Sep 2006
Posts: 449
From: S.E. Valley Phoenix
Default Revnton Wireless Bluetooth module.

Is the wireless module OK to mount in an off-road 2WD buggy? Will it hold up to the jarring in a an off-road 2wd buggy, or is it not advisable to do so? If it fits, I was going to mount it with a triple layer of double sided tape to provide some cushion.
1mrdad is offline  
Old 01-10-2013 | 01:30 AM
  #2763  
Suspended
iTrader: (440)
 
Joined: Jan 2007
Posts: 10,180
From: VA
Default

Will the silver arrow v2 ever be restocked at the USA warehouse?
MattP is offline  
Old 01-10-2013 | 01:30 AM
  #2764  
Suspended
iTrader: (440)
 
Joined: Jan 2007
Posts: 10,180
From: VA
Default

.

Last edited by MattP; 01-10-2013 at 07:48 AM.
MattP is offline  
Old 01-10-2013 | 01:30 AM
  #2765  
Suspended
iTrader: (440)
 
Joined: Jan 2007
Posts: 10,180
From: VA
Default

.

Last edited by MattP; 01-10-2013 at 07:48 AM.
MattP is offline  
Old 01-10-2013 | 01:32 AM
  #2766  
Suspended
iTrader: (440)
 
Joined: Jan 2007
Posts: 10,180
From: VA
Default

.

Last edited by MattP; 01-10-2013 at 07:47 AM.
MattP is offline  
Old 01-10-2013 | 07:20 AM
  #2767  
Cain's Avatar
Tech Legend
iTrader: (304)
 
Joined: May 2002
Posts: 35,030
From: West Fargo, North Dakota
Default

really want another huh matt? LOL
Cain is offline  
Old 01-10-2013 | 07:24 AM
  #2768  
Tech Champion
iTrader: (42)
 
Joined: Nov 2002
Posts: 7,758
From: Chicago, IL
Default

Originally Posted by 1mrdad
Is the wireless module OK to mount in an off-road 2WD buggy? Will it hold up to the jarring in a an off-road 2wd buggy, or is it not advisable to do so? If it fits, I was going to mount it with a triple layer of double sided tape to provide some cushion.
I ran my Tamiya TRF201 with the WIFI module with no side effects. My RB5 is much tighter, but I did run it with the Bluetooth module for 2 practice/race days.

This was using very thin 3M double sided tape. Both the WIFI and Bluetooth are working fine.
Nexus is offline  
Old 01-10-2013 | 07:47 AM
  #2769  
Suspended
iTrader: (440)
 
Joined: Jan 2007
Posts: 10,180
From: VA
Default

Originally Posted by Cain
really want another huh matt? LOL
WOW I didn't know my stupid Ipad posted it that many times!!!
MattP is offline  
Old 01-10-2013 | 07:49 AM
  #2770  
Suspended
iTrader: (440)
 
Joined: Jan 2007
Posts: 10,180
From: VA
Default

Originally Posted by Cain
really want another huh matt? LOL
I've bought six of the Hobbywing Xerun 150amp escs to hold me over since they are supposedly the same esc......
MattP is offline  
Old 01-10-2013 | 07:56 AM
  #2771  
Cain's Avatar
Tech Legend
iTrader: (304)
 
Joined: May 2002
Posts: 35,030
From: West Fargo, North Dakota
Default

Originally Posted by MattP
I've bought six of the Hobbywing Xerun 150amp escs to hold me over since they are supposedly the same esc......
Heard that too. layout looks similar other than the obivious case difference.
Cain is offline  
Old 01-10-2013 | 10:26 AM
  #2772  
66Racer's Avatar
Tech Regular
iTrader: (5)
 
Joined: Jan 2008
Posts: 307
From: Orange county, ca
Default

Originally Posted by WarTrader
I've run one in the past without issue. I do run Blinky 17.5 with minimal timing with lower gear ratios. Mind you I've run it in a pretty light 22 on a very tight, high bite track that gives little chance to really run wide open for very long.
Thanks
66Racer is offline  
Old 01-10-2013 | 03:19 PM
  #2773  
vr6cj's Avatar
Tech Elite
iTrader: (124)
 
Joined: Jul 2008
Posts: 4,050
From: Modesto, CA
Default

Originally Posted by subaru_tech
had the same exact problem.exact.
you have done everything you can m8.send it in.
just dont hold your breathe waiting for it to come back.
yeah, this is my friends and it did the brick thing right in front of us. Feel bad for him because now he'll have to deal with their custormer service.

I'll have two used Reventon Pros up for sale soon if anyone interested. lol
vr6cj is offline  
Old 01-10-2013 | 06:05 PM
  #2774  
Tech Master
iTrader: (54)
 
Joined: Apr 2006
Posts: 1,592
Default

How long does it take the USA warehouse to ship someting out? I bought and paid for 2 Reventon Pro's and a Motor on Monday and they have not shipped yet according to My Order History.......
jsmax is offline  
Old 01-10-2013 | 06:06 PM
  #2775  
vr6cj's Avatar
Tech Elite
iTrader: (124)
 
Joined: Jul 2008
Posts: 4,050
From: Modesto, CA
Default

Originally Posted by jsmax
How long does it take the USA warehouse to ship someting out? I bought and paid for 2 Reventon Pro's and a Motor on Monday and they have not shipped yet.......
ha, welcome to the SP club. It'll take them a week to process and another to ship. So about two weeks total before u have them.
vr6cj is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.