|
Have a Castle Creations 1/10 scale sidwinder speedo and a 5700 KV motor,,, were should i start to gear this monster at???? thanks
|
Originally Posted by RcRacing4Ever
(Post 6653366)
Hello...What are you guys gearing your 10.5 at? Just got a Ballistic & was wondering...the chart says like a 9.5 gear ratio. That would be like a 87s & 24p .. that sound about right?
84/23 78/21 75/21 72/20 should work fine if they fit. |
how are you guys holding your batteries in? I like running with my lipo all the way against the rear tower but cannot with the stock battery hold down bar. I have dremmelled out a spot in the front so I can run velcro thru it and use that to hold the battery in but had it come undone last weekend and the battery fell out. pictures or other ideas would be great.
|
Originally Posted by ollie 45
(Post 6655129)
how are you guys holding your batteries in? I like running with my lipo all the way against the rear tower but cannot with the stock battery hold down bar. I have dremmelled out a spot in the front so I can run velcro thru it and use that to hold the battery in but had it come undone last weekend and the battery fell out. pictures or other ideas would be great.
http://i292.photobucket.com/albums/m...e/S7300715.jpg http://i292.photobucket.com/albums/m...e/S7300716.jpg http://i292.photobucket.com/albums/m...e/S7300717.jpg http://i292.photobucket.com/albums/m...e/S7300718.jpg |
1 Attachment(s)
Originally Posted by ollie 45
(Post 6655129)
how are you guys holding your batteries in? I like running with my lipo all the way against the rear tower but cannot with the stock battery hold down bar. I have dremmelled out a spot in the front so I can run velcro thru it and use that to hold the battery in but had it come undone last weekend and the battery fell out. pictures or other ideas would be great.
|
traxxas electronics
Anyone have a baseline gearing for the SC10 with all the traxxas electronics?
|
Originally Posted by Lowrance
(Post 6655267)
Most everyone at my track has modified the stock battery hold down with a dremmel like so....
|
Originally Posted by LWracer
(Post 6655372)
Anyone have a baseline gearing for the SC10 with all the traxxas electronics?
|
Going to try and get some forward bite by changing some +1 toe in blocks SPTSTC9584-T1B. What other parts do I need (with part numbers if possible)to complete this mod...
|
i think the st racing carriers are a direct bolt on, i run the racers edge because they have an extra ball stud hole so you can lenghthen the rear camber links. the only downfall is u have to run the b44 outside bearing and crush tubes.
|
Originally Posted by big deee
(Post 6655179)
I cut slots in the chassis like used to run the esc wire. Then Velcro straps to hold it down.
http://i292.photobucket.com/albums/m...e/S7300715.jpg http://i292.photobucket.com/albums/m...e/S7300716.jpg http://i292.photobucket.com/albums/m...e/S7300717.jpg http://i292.photobucket.com/albums/m...e/S7300718.jpg |
Originally Posted by xraysteve
(Post 6659223)
You have some positive camber in the rear. You might want to look at that.
|
Originally Posted by Sage
(Post 6659250)
that's without a battery loaded. it may drop them back in to the right spot.
|
battery hold down
i'm using the carbon fiber battery strap from ae
http://www.amainhobbies.com/product_...-Battery-Strap |
Originally Posted by balistic
(Post 6659378)
actually I think it should gain negative camber at full droop.
either way, without the battery it's not accurate of how is camber is set... ;)
Originally Posted by RA99GT
(Post 6660048)
i'm using the carbon fiber battery strap from ae
|
| All times are GMT -7. It is currently 12:55 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.