352Likes

NOVAROSSI Engine thread....

Reply Subscribe

Thread Tools

Search this Thread

03-23-2019 | 07:47 AM

#10216

RCTecher12

Tech Fanatic

iTrader: (1)

Joined: Aug 2017

Posts: 834

I misspoke. 0.04mm is perfect.

Last edited by RCTecher12; 03-23-2019 at 12:32 PM.

03-23-2019 | 08:36 AM

#10217

kgombe

Tech Elite

iTrader: (13)

Joined: Aug 2008

Posts: 3,513

Quote:

Originally Posted by SlowLST2

That’s still a lot/too much IMO. .04mm is almost .016”. .001” endplay is as tight as you want, maybe .003-.004” on the high side.

maybe read first before trying to show off your math skills.. 😅

he said .04mm not .4mm

.04mm is .001in

03-23-2019 | 09:32 AM

#10218

houston

Tech Prophet

iTrader: (96)

Joined: Sep 2004

Posts: 15,844

From: Sherwood,OR

Quote:

Originally Posted by Cardiak

I'm replacing my clutch bell but when I go to tighten the retaining screw and washer, the clutch bell binds. I have 4 washers behind the rear clutch be bearing.

need shaft extender washer .....

03-23-2019 | 10:28 AM

#10219

Cardiak

Tech Addict

iTrader: (1)

Joined: Dec 2016

Posts: 601

Yep. I was using one but I figured out the problem. I was thinking that I had put 2.4mm worth of washers on the extension. Everything is good now.

Chad Millikan likes this.

03-23-2019 | 12:31 PM

#10220

RCTecher12

Tech Fanatic

iTrader: (1)

Joined: Aug 2017

Posts: 834

Quote:

Originally Posted by kgombe

maybe read first before trying to show off your math skills.. ��

he said .04mm not .4mm

.04mm is .001in

Initially they said .94, but corrected it in a subsequent post... I don’t study the metric system, so I use those stupid and rarely accurate internet converters. Oddly enough, I suspected another conversion I did didn’t make much sense... So only after using a different formula did I find the mistake and the correct conversion result. I’ll edit my post to read correctly.

03-23-2019 | 12:37 PM

#10221

RCTecher12

Tech Fanatic

iTrader: (1)

Joined: Aug 2017

Posts: 834

Quote:

Originally Posted by houston

need shaft extender washer .....

Yup. Comes in a clutch shim kit usually.

03-25-2019 | 05:53 PM

#10222

HaulinBass

Tech Elite

iTrader: (16)

Joined: Dec 2004

Posts: 3,096

From: grande prairie alberta canada

anyone ever measure up the bore and stroke on the mantra? not just what nova states but the actual numbers. Unless he was getting some weird numbers its not a square stroke motor or a .21, its 16.46 bore with a 16.8 stroke closer to a .23 than a .21.

03-26-2019 | 02:00 AM

#10223

Pedro Jesus

Tech Regular

Joined: Apr 2016

Posts: 278

From: Portugal

[QUOTE = HaulinBass; 15420134] alguém já mediu o furo e o derrame no mantra? não apenas o que a nova diz, mas os números reais. A menos que ele estava recebendo alguns números estranhos não é um motor de acidente vascular cerebral quadrado ou um 0,21, sua 16,46 furo com um golpe 16.8 mais perto de uma .23 que um .21. [/ QUOTE]

Its 16.42mm not 16.46mm

03-26-2019 | 06:59 AM

#10224

HaulinBass

Tech Elite

iTrader: (16)

Joined: Dec 2004

Posts: 3,096

From: grande prairie alberta canada

is that measured or what novarossi states? because the guy that measured mine gave me those numbers and its a guy whos opinion is fairly well trusted

03-26-2019 | 02:27 PM

#10225

91junior

Tech Adept

iTrader: (1)

Joined: Jul 2017

Posts: 207

Quote:

Originally Posted by HaulinBass

My brother,
I have two Novarossi Mantra’s. Ones a factory Nova engine and ones a Hobby shop “deal” I got before I picked up a novarossi power supply.

The Factory mantra measures a tad different to what your stating above but is still close enough to a .23.
However the one from the hobby shop which is a “buy off the shelf version” measures exactly what your stating.