ridge runner - if it runs backwards, just reverse the two outside wires. Rather make the mechanical change than the software. It doesn't matter with our motors. But other companies motors setting the speed control to reverse might not work as well.

gawith - yep - profile 1 then, I keep hearing different stories about that motor. Just remember to set the voltage cut off for 3s also.

Thanks guys just wanted to make sure now to get this 4x4 rockin.

Hey Nick, what do you mean by stories? You can pm me if you want. Thanks

Changed the two outer wires still runs backwards had to change in the esc all good now.

Hey Nick,I put the Copperhead and 4 pole in the Losi,I keep having a problem with it stoppingafter running 5-6 minutes(sometimes).It seems to be thermaling out.Tried to look with pro gage to see iff there was a temp setting for esc but did not find it.Motor is warm but not real hot.So I think its the esc.Call me or let me know what you think.It only has 2 races on it.

I only buy this brand has NOT FAILED me yet, I have plenty spares and parts. and haven't use it yet, still using the same VTX10/ VST6.5T for 2years on both of my 22 platforms. And I Race and Bash the crap out it. My secrete is to run it cool.

Ezlink.
Simplified progauge in what way? Adjustment options?

I don't have all the details yet, but from what I understand is that it's strictly a programmer as opposed to the other features of the Proguage

***edit*** got some more info

Proguage does servo testing, lipo, etc.
Ezlink will just be programmer

hey nick i have been emailing you are you out of town or super busy?

The new EzLink will be nice. It does all the track side programing with out the servo tester and other items that I don't use on the ProGauge. It will lower the price on combo with an ESC as well.

Guess its good to be missed?? My brother in law got married yesterday so I wasn't on line much.

Tom - check your PM

For those who have asked. The new EZ Link programmer will be shipping with all new speed control and combo packs in June. Same programming features that the ProGauge has, but does not include the other features like PWM test, battery test, etc. and the good news is it let us lower the overall price of the systems. Easier to use, better price= everyone wins!!!

Ed- check some of your settings like Punch and Timing - try slightly lower. It also depends on the type of cut off your getting - any warning lights on esc? 4 pole motors draw so much current it can easily draw a battery down to LVC (depending on the pack). Email me if you got more questions.

Not getting rid of the pro gauge???

ProGauge with all the functions will still be available as a separate purchase item. We just wanted to find a way to help save everyone a little money.

Need a little help i have a VX4R system, i had been running and took a break went to turn on my system and the F & R are flashing tried rebinding tried to just throttle + a little and - a little no help all the wires look good and plugged in any help.