.

have you received my emails??

Nick, I am just wondering if you are the same Nick that I emailed concerning chassis sponsorship through HAD. Nick Malato? Thanks for your time. Matthew Akkola

Hi Nick, I was going to place an order for some arc parts, I am local can I pick up in store? If so should I place the order online and leave a note or. . .

That's why I'm hoping for something new in the near future. Until then its A61

No if you remember I bought a brand new viper vf445 and still got the same error after 10 seconds on the track. (it happens with 3 different motors,4 different sensor wires, 2 different batteries and a new set of bullet connecters on motor and battery)Viper drivers are the one's that told me A64 doesn't play well in some esc's. There a several people who have had the same problem, they just run a61 with No problems

You wanted me to pm ya about the A64. Every time I run it I get the alternating f&R lights and it shuts down. got tired of DNF'ing ,Tried everything. re-soldered,new motors, new sensor wires,spoke to a few sponsored drivers in the region and they all said to go back to A61,A64 has a glitch, on some esc's it works fine and on others you just get that error code all the time. They said if it doesn't take to just use A61 which I did for the last 7 race days that I attended in August ,September and October and haven't had a problem. 3 heats each plus 15-20 minutes of practice each day

Hi there I own a viper copperhead-r system and I last used it to center my steering servo and shut down the esc and unplugged the battery and when I went to go and use it the next time it would turn the power light and the neutral light on for a second and then shut off on me. It was working great before that. I have no warranty anymore and would like to know if the cost to ship it to viper and to get it fixed is even worth the hassle or the money to do it?

Hi, i bought a VTX8-1900kv combo.
Was trying it today, 2 runs and it was working awesome. No more than 10-12 minutes.
On the 3rd run around 7-9 minutes the car stopped but i could move the steering servo, the ESC was still on.
If i pull the trigger forward the F light in the ESC turns on and if i brake the R light turns on but anything happens with the motor.
I turned it off and turned it on, the ESC lights do everything normal but no beeps, again after that i could move the steering servo but nothing with the motor.
I was running it blinky with cuttoffs (160 motor) (220 ESC).
Whats wrong?

hey.... Fantasy World races in Tacoma, I-5 south to the 72nd 84th street exit, you will see home depot on your right as you exit the freeway. we race in the south end of the parking lot, you can't miss the bus. we setup the track starting at 8:30, so I wouldn't show until about 930 unless you wanna help lol. I currently have a mod motor in the ARC and it isn't set up, was hoping to get on of the 4* mounts to help stabilized the rear (widen it) your already sold out... anyway, your welcome to run it if you don't have something already... just ask for Ritchie