Originally Posted by vito

iam saveing up for this truck what do i need to know and what parts to get?

Originally Posted by vito

i had a lhs here had a fire long story. iam on a set in come and need a place on line to get parts from. iam thinking team rpp hobby how are they. and i use a pre pay visa card

Originally Posted by vito

whats the pin mod ?

Originally Posted by vito

i found it is it need to just bash?

Originally Posted by vito

whats a good motor for this truck i have mmp esc and like to keep it for this kit. and i dont race an it will be ran on 2s or 3s lipo pack.

Originally Posted by vito

ty can i get a link to that motor an i have 5700 kv 4 pole 2 try out to

Originally Posted by vito

Originally Posted by vito

i have a s3s pack and its a 3300 and the same size as my 2s one

Originally Posted by vito

will my 4 pole 5700 kv work?

Originally Posted by vito

hows the 3800 one for this kit

Originally Posted by vito

thanks ill get the kit now and run my mmp esc with a 2400 kv set up ty

Originally Posted by vito

will this kit hold up to a 2400kv and mmp esc on 3 s lipo?

Originally Posted by vito

wheres a good deal on the kit. my lhs had a fire and i like to buy it from rpp hobby?

Originally Posted by vito

iam on my way to wallmart to get one got to put money on my card

Originally Posted by vito

whats all pre built in the kit and what to look for ty?

Originally Posted by vito

i can live with that. ill re do them

Originally Posted by vito

http://teamassociated.com/pictures/p...4/91054_md.jpg
what are the small 1 2 clips for i dint see the in the book?

Originally Posted by vito

thanks i do like this kit a lot wheres pay day ill pick one up from rpp

Originally Posted by vito

what do i need to pick up to start my kit ?

Originally Posted by vito

is the savox 252 mg be fine to use?

Originally Posted by vito

good ??????

Originally Posted by vito

how hard are the sway bars to mount up ?

Originally Posted by vito

thanks they come with paper work lol

Originally Posted by vito

thank you all the guys fro the help now. iam saving up for this kit and right now iam at 70 bucks on monday i hope to have a 100 . and by the frist of the year.

Originally Posted by vito

i look at the book and dint see a page with the bolt size and nuts they use.

Originally Posted by vito

my set up for this kit i have a savox 252 servo a dx3c radio and mamba max pro esc and a better motor to get?

Originally Posted by vito

will this kit run ok with a mmp esc and a what 540 motor till i get some more money?

Originally Posted by vito

is wiil be my frist belt dive car what do i need to look out for ant tips with the belt drive set up?

Originally Posted by vito

what diff and shock oil do i pick up ?

Originally Posted by vito

with my mmp esc can i run the new reedy motors fine?

Originally Posted by vito

how the kit set up out of the box and i just bash and ill get sway bars too run.

Originally Posted by vito

can i send in my kit to be done from rpp jk lol

Originally Posted by vito

where do i buy hop ups from?

Originally Posted by vito

thanks i have a ? whats the slipper basket do.

Originally Posted by vito

thanks i will just bash this kit and do i need it ill just lock down the nut

Originally Posted by vito

where did you guys buy one from?

Originally Posted by vito

got some money saved up where to get a kit at on line

Originally Posted by vito

i got to go retail i need a new kit

Originally Posted by vito

my lhs had a big fire so iam got to buy on line

Originally Posted by vito

i got a pre payed visa card

Originally Posted by vito

thanks i not useing pay pal

Originally Posted by vito

how much will shipping be at a main. i like to use rpp hobby and dose tower hobby shipp out of nv as iam i roseburg or

Originally Posted by vito

thanks ill try rpp or a main now

Originally Posted by vito

iam going to get it from a main now ty guys

Originally Posted by vito

will i need the brace as i just bash?

Originally Posted by vito

is it hard to put on?

Originally Posted by vito

ok this will work one brace an lock the slipper down for a basher set up