Originally Posted by Autocratic (Post 13255313)

Anyone using the R Pro 1.1 with a 4 pole? I ran my new Fantom 4850 today on the Tekno. 15T pinion. Was hitting thermal protection on the ESC within 4 or 5 laps. Punch is level 1. No timing, Mod2 software. I think the 15T pinion might be a little much. The motor does offer timing adjustment, so I wonder if I can get the amp draw down that way as well. Motor is getting 150s and the ESC cutoff is set to 95C.

I tested the Blaze 4600 and it was too slow for my local track, even with a big pinion. Temps were awesome though. Was thinking of trying the 5700 back to back with the Fantom 4 pole.

Originally Posted by Ultraspeed84 (Post 13256333)

so any issues with the revention series of ESC? How well does the app work with the ESC? im thinking of trying it in my 2wd mod buggy.

Originally Posted by b4wires (Post 13256324)

Nice. what was your temp on the motor and ESC?

Originally Posted by tshaec5r (Post 13248038)

Anyone using this ESC in their buggy. Comments on reliability? Overall satisfaction?

Originally Posted by SRW141 (Post 13256455)

Motor was 150 and I didn't check speedo. It didn't feel hot and it had a fan on it.

Originally Posted by tshaec5r (Post 13248038)

Anyone using this ESC in their buggy. Comments on reliability? Overall satisfaction?

Originally Posted by hairymuffin (Post 13257749)

I love it!!! been using it for the past 3 years...Had this esc in since last year..Keep in mind that we only race with the ebuggy,not much practice bashing,I think it helps with reliability.. Took 1st place this weekend in the pro class

Originally Posted by knuckleheads (Post 13267780)

Hi guys - Bought a new $50 SP Revention combo from RCTech in China. Just hooked up to my T4.2 and the esc has some issues:

1) Delayed throttle response- nothing and then a burst that will wheelie the truck. Occasional throttle continuance (un-nerving) - it keeps on throttling for about a second or two after you let go of trigger.

2) Fan running normal for about 3 seconds and then going hyper at about 88,000 rpms.

Has anyone experienced anything like this before?

Thanks in advance for the help!

Originally Posted by Jeff773 (Post 13267850)

Can the speed passion GT2.0 low profile esc run a 6.5t motor on a 2s lipo? On there website it says 5.5t on a 6cell 7.2v so I'm guessing that's nimh. All responses are greatly appreciated.

Originally Posted by the incubus (Post 13267816)

Try connecting it to a Mac or PC and reset or update the firmware to see if that cures your issue.