|
I love these esc's. That work great! I have several with no issues!
|
speed passion silver arrow 1/8 buggy
Anyone using this ESC in their buggy. Comments on reliability? Overall satisfaction?
|
Originally Posted by tshaec5r
(Post 13248038)
Anyone using this ESC in their buggy. Comments on reliability? Overall satisfaction?
|
Originally Posted by SRW141
(Post 13248045)
I use it with the SP 1800. It works great. Second season on it. No issues at all.
|
Will also be running a Trinity D8 1950kv motor and spectrum 8000 sevo. Decent Combo with the silver arrow?
|
I use all speed passion motors 1800kv blaze. I always use Futaba servos.
I know a lot of people that use the tekin 1950kv. I lime the sensor less setup. |
Originally Posted by b4wires
(Post 13245954)
Hey guys, I'm racing a Reventon Pro 1.1 with a BLAZE 5700. In my TLR SCTE-TEN 2.0. At the same tracks as J Pietsch races at. I had Tekin RX8 with HD 4600. I like the Speed Passion ESC/motor better. Much smoother throttle with the Speed Passion. I'm running the modify 2 in my Reventon Pro 1.1
|
Can someone please tell me where I can a professional lcd card
For gt series esc Or does anyone have one for sale |
hobbywing one will work if you can't find a SP branded one.
Just flash the card over to SP software. That is what I have been using for awhile now. |
Originally Posted by koopesv
(Post 13249856)
Can someone please tell me where I can a professional lcd card
For gt series esc Or does anyone have one for sale |
Anyone using the R Pro 1.1 with a 4 pole? I ran my new Fantom 4850 today on the Tekno. 15T pinion. Was hitting thermal protection on the ESC within 4 or 5 laps. Punch is level 1. No timing, Mod2 software. I think the 15T pinion might be a little much. The motor does offer timing adjustment, so I wonder if I can get the amp draw down that way as well. Motor is getting 150s and the ESC cutoff is set to 95C.
I tested the Blaze 4600 and it was too slow for my local track, even with a big pinion. Temps were awesome though. Was thinking of trying the 5700 back to back with the Fantom 4 pole. |
Originally Posted by Autocratic
(Post 13255313)
Anyone using the R Pro 1.1 with a 4 pole? I ran my new Fantom 4850 today on the Tekno. 15T pinion. Was hitting thermal protection on the ESC within 4 or 5 laps. Punch is level 1. No timing, Mod2 software. I think the 15T pinion might be a little much. The motor does offer timing adjustment, so I wonder if I can get the amp draw down that way as well. Motor is getting 150s and the ESC cutoff is set to 95C.
I tested the Blaze 4600 and it was too slow for my local track, even with a big pinion. Temps were awesome though. Was thinking of trying the 5700 back to back with the Fantom 4 pole. |
I ran the blaze 5700 stock spur on the TLR and 15t pin. 11.75 degrees of timing on the ESC. I had no problem keeping up with the 4 pole motors. Outdoor track that is 140' x 70'
|
Originally Posted by SRW141
(Post 13255876)
I ran the blaze 5700 stock spur on the TLR and 15t pin. 11.75 degrees of timing on the ESC. I had no problem keeping up with the 4 pole motors. Outdoor track that is 140' x 70'
|
so any issues with the revention series of ESC? How well does the app work with the ESC? im thinking of trying it in my 2wd mod buggy.
|
| All times are GMT -7. It is currently 10:41 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.