Speed Passion Thread
#4833
Joined: Jan 2004
Posts: 5,058
From: Rockville, MD
#4837
Hey guys, I'm racing a Reventon Pro 1.1 with a BLAZE 5700. In my TLR SCTE-TEN 2.0. At the same tracks as J Pietsch races at. I had Tekin RX8 with HD 4600. I like the Speed Passion ESC/motor better. Much smoother throttle with the Speed Passion. I'm running the modify 2 in my Reventon Pro 1.1
#4840
#4841
Anyone using the R Pro 1.1 with a 4 pole? I ran my new Fantom 4850 today on the Tekno. 15T pinion. Was hitting thermal protection on the ESC within 4 or 5 laps. Punch is level 1. No timing, Mod2 software. I think the 15T pinion might be a little much. The motor does offer timing adjustment, so I wonder if I can get the amp draw down that way as well. Motor is getting 150s and the ESC cutoff is set to 95C.
I tested the Blaze 4600 and it was too slow for my local track, even with a big pinion. Temps were awesome though. Was thinking of trying the 5700 back to back with the Fantom 4 pole.
I tested the Blaze 4600 and it was too slow for my local track, even with a big pinion. Temps were awesome though. Was thinking of trying the 5700 back to back with the Fantom 4 pole.
#4842
Anyone using the R Pro 1.1 with a 4 pole? I ran my new Fantom 4850 today on the Tekno. 15T pinion. Was hitting thermal protection on the ESC within 4 or 5 laps. Punch is level 1. No timing, Mod2 software. I think the 15T pinion might be a little much. The motor does offer timing adjustment, so I wonder if I can get the amp draw down that way as well. Motor is getting 150s and the ESC cutoff is set to 95C.
I tested the Blaze 4600 and it was too slow for my local track, even with a big pinion. Temps were awesome though. Was thinking of trying the 5700 back to back with the Fantom 4 pole.
I tested the Blaze 4600 and it was too slow for my local track, even with a big pinion. Temps were awesome though. Was thinking of trying the 5700 back to back with the Fantom 4 pole.



4Likes