R/C Tech Forums - Speed Passion Thread

Mine just keeps disconnecting. If I go into safe mode it connects, then as soon as I try to update the firmware it disconnects. Both on my iPad and iPhone.

Mopar

03-27-2014 10:14 PM

Any one know if you can use the programming card from the LPF EX Pro on the Reventons.:batman:

SeeGee911

03-27-2014 10:17 PM

Quote:

Originally Posted by 13Maschine (Post 13136688)

The app works guys, it's just not Apple approved. Have you tried it and are having trouble? What

I have used the wireless module a few times on iPad 7.1 and the real trick is just being patient. It's a little hard to tell when the app is doing something in the background. I have also seen it say "disconnected" a few times. However when I try again i'm usually able to update firmware and adjust settings. Sometimes it just takes a couple of retries….I'll try again and see if I can recreate the problem.

Don't seem to have any issues with the bluetooth module, but I would like to say that the option for changing settings using a circle or bar interface pretty much sucks. I would rather have a list of settings with dropdowns for selection or a scrollable wheel, or simply an up/down arrow. Don't worry about making it "pretty" just make it useful. The software does work, it's just cumbersome.

goose510

03-27-2014 10:32 PM

How do I go into blinky mode on a gt2.0 pro? I'm using the LCD/pc 1.38 interface. I am currently in software v3.0_120428STOCK. I can find a throttle profile that has no timing. Only forward/brake; forward/reverse with brake; forward/reverse direct. Any help would be appreciated.

S.TRIPP77

03-27-2014 11:02 PM

Quote:

Originally Posted by caprezmikeb (Post 13134393)

I have a very similar question. In the manual it just has timing. No boost options. So does speedpassion have a boost option? And if so how tunable
Is it?

I found our question bro Google every thing I type and use Google.
Speed passion revention pro stock 1 firmware
It is a pfd file. It tells everything about the boost!!!
Now we need a setup to start with.

CENTRAL

03-28-2014 12:05 AM

Will the reventon R & 7.5T v3 motor combo be a good choice for equipping a Tamiya trf511 on a budget?

Thanx!

kwiksi

03-28-2014 02:41 AM

Quote:

Originally Posted by Mopar (Post 13136799)

Any one know if you can use the programming card from the LPF EX Pro on the Reventons.:batman:

No you cannot.

kwiksi

03-28-2014 02:49 AM

Quote:

Originally Posted by goose510 (Post 13136814)

To be honest with you. I don't know or remember if the older Gt's had the blinky software in V1.38. Been awhile since I owned one and never ran blinky with one. If it was in there it would be in the drop down menu.

clintscreations

03-28-2014 08:38 AM

Quote:

Originally Posted by goose510 (Post 13136814)

You should be looking for 508blinky or 508stock in the drop down

the.okie

03-28-2014 08:35 PM

Quote:

Originally Posted by the.okie (Post 13136433)

I have the reventon stock club race with the 10.5r motor. I hooked it up and it worked. Took it to the track and within a couple minutes (2-3) it stopped all together. It is just flashing the red light in the esc. It appears that's saying I have a low battery? It doesn't go away no matter what battery is in there, I even turned off lvc. Any ideas?

Bump, anybody?

clintscreations

03-28-2014 09:55 PM

Try updating the firmware.

if that doesnt work get an RA and send it in for repair

thephunnel

03-29-2014 04:18 PM

Anyone have any experience with Speed Passion's service? How are they to deal with? What are the service rates like?

I have a Cirtix club stock esc that doesn't work. I'm trying to decide if its worth it to send it in for repair, or just toss it.

13Maschine

03-30-2014 08:56 AM

Speed Passion support has been very good for me. I've had one warranty repair on my Reventon Pro and it was done lickity split without too much hassle. Just send an email to support with details of your issue and where you purchased etc.

S.TRIPP77

03-31-2014 07:08 PM

stock 1 setting

OK guys I am boosting a 17.5 with the stock 1 program and the question is???? Is the slop rate how fast the motor spins down from full trigger??

Captcha

04-01-2014 08:18 AM

I have a Tech question of sorts. I am looking at getting the Reventon Pro 1.1EX very soon, and with my stock car (17.5 2wd buggy) I run both stock and mod, so I want an ESC that I can add boost and such for the mod class. My question is, can this be down with the LED or LCD card, or only through the Computer Program? I believe a friend has a reventon pro, and stated he can only change his on the computer. This does not effect me at all, I am just curious so I know.

Thank you in advance,
Brandon

All times are GMT -7. It is currently 04:26 AM.

Page 316 of 385

316

Show 40 post(s) from this thread on one page