Got it. Just placed order

figured out the problem. the connectors were soldered to the "wrong" wires. so the A B and C colors werent what what they were supposed to be.

Matt

You had B and C mixed up. The SP colours for those are yellow for B and orange for C. Your initial post had those two the other way around.

well considering blue was on the C wire they were all in the wrong place. lol, i pulled up the manual online and checked the wire position. once i got the wires in the propper place all was well.

Matt

Sounds like they gave you a puzzle to solve in addition to the normal product then ;)

I have a Tekno SCT410 on the way. I already have an extra GT2.0 and an LPF. I've read that these may work with the Tekin Pro-4. Anybody using these?

Thanks

well considering blue was on the C wire they were all in the wrong place. lol, i pulled up the manual online and checked the wire position. once i got the wires in the propper place all was well.

Matt

I use GT2.0 Pro with the Pro4 4600Kv motor, no boost, timing etc on the 428mod profile. You can use the blinky one was well. Works excellent. Motor actually runs pretty cool too.

Cool! I don't know what software came with the esc's I don't have a way to change software at the moment. What do I need to do this? Or do I just turn the timing off on the set-up box?

thats what I did, turned all the software boosting, timing, etc off.

SP. change in prices.
All the Reventons S and Club went up in price. Club is about what the R was. So how much will the R be now?

I have the Reventon R and downloaded Stock1... I couldn't use the progamming box to adjust parameters.... Mod 0 and Mod 1 work fine??? I'm using the correct box... any help or advice?

Has anybody successfully used the optional MMM timing boards on the competiton V3 17.5/21.5 motors. They compatible?

Correct box as in LCD and not the LED?

Can someone tell me what Dynamic Multi
Timing System is? it this just regular sensored timing?


EDIT: found it in the manual, somehow missed it the first time.