I just ordered the pro stock 2.1 esc with a 10.5, I plan on running in a sc10 mod. Was wondering what would be the best software to use the stock one or the newest software.

And what is the software that comes on the esc, is it 528?

if you run mod matt, drop in the latest stock boosting software, I think its 428stock or something similar in name. You can then get all the boosting, etc to your hearts delight lol.

well i got my hands on a 33T pinion. im going to run that with the 75T spur. now i just need Big Bore springs and Blue barcodes and im good to go.

Matt

awesome. I understand now. Thanks

Any word on a new 8th scale esc

Any update of when the Silver Arrow Esc will be in stock? I love this ESC.

Howard mentioned a small shipment of Silver Arrow V2s were going to arrive very soon. No specific date.

The Silver Arrow TQs and Wins...
http://teamspeedpassion.com/2013/02/...ter-nationals/


Speed Passion's Mike Kochanski places 2nd in 4WD Buggy "wheeler"!
http://teamspeedpassion.com/2013/02/...idential-race/

Sweet, I need 2 of them :D

Silver Arrow 2 are instock.

Has anyone experianced a reventon not wanting to move without an initinal push? I have tried 2 different motors, different sensor wires and still have the same issue. If I give the car a push to get going all is good but if I come to a complet stop it will mot move without help? The only think I have not tried yet is reflashing the software.

I saw it on an R. Needed to be sent in and replaced.

for some reason my ESC needed recalibrated. so since i have a futaba radio i set the throttle channel to reverse and tried to calibrate. it refuses to work. i have also tried it with the throttle channel normal. cant seem to make it work at all.

Matt

I had that happen to me when I updated the software when mod2 came out, went back to the previous version, and the issue went away..:(

also if i pull the sensor wire off it runs in the propper direction. i have Blue on socket A yellow on socket C and orange on socket B. not sure WTF is wrong...

Matt

Pretty sure I've got the same issue with one of my Rev Pro's. Running Mod2, I'll solder it back up and flash to Mod1 and see if I can get it working. Other Rev Pro on Mod1 hasn't had the issue so hopefully it's just a firmware bug.