Will work as in? Motor and esc temps normal?
Plenty of giddy up for weekend racing?

if its like the GT2.0 Pro, yeah, it will have normal temps and work fine. You just can't be boosting the motor, etc.

Hi everyone, I just picked up a Reventon Pro, put it in, and updated the firmware with Reventon Pro Drift with my computer and the program card. I updated the settings to add forward/brake with reverse and LiPo cutoff.

It worked for the first few runs, but now whenever i start it up, the two led lights come on, but after a couple of seconds the motor (a SP competition 3.0 5.5T) starts to make a buzzing noise and the lights go off. When i pull the throttle, the lights come back on, but I lose reverse functionality.

Can anyone help me?

Finally got around to installing my Reventon Pro into the B4 buggy with a 10.5 motor. I am interested in using the wifi module to make changes with my iphone. Reading through the Speed Passion notes on the module it states that it will not work with the most recent iphone OS which is ios7. Is this still a problem and if so, will it be worked out to be able to use the wifi module with the iphone?

speed passion
 

All I can say about the speed passion systems j got I that they are the bomb!!!! I love them and I am getting another one this week.

With that being said what do I need to run a 4x4 corr truck???? I would like to know what set up to buy from speed passion.

Will the bluetooth module actually work with an iphone with ios7?

I bought an used gt pro 2.0 esc. Installed it yesterday, powered up fine. When i went to go program it, the manual says timing and supercharger boost is adjustable, but i cant access those parameters. Do i need a newer firmware?

it probably has the blinky firmware installed. you will need either the mod or the boosted stock firmware.

the speed passion LCD Professional Program Card is out of stock everywhere...:cry:

any of you have one that i can borrow? i would pay for shipping of course.

I use this one. Hobbywing made the sp gt pro 2.0. Its based on the HW v2.1 120amp esc.

http://www.falconsekido.com/products/lcd-program

Shows in stock when I look at it...
http://www.speedpassion.net/us/produ...SP000056&c=OPT

that is for the reventon, please dont confuse him

neither module works with ios7


http://www.speedpassion.net/us/produ...SP000009&c=OPT

http://www.speedpassion.net/us/produ...SP000008&c=OPT

Keep getting these Blaze 550 4-Pole SC motors in my Facebook feed.

Being offered in 4600 and 5700 KV... I assume the 4600 would be a lot of motor, kind of like my Pro4 HD 4300 I use now which is a whole lot of motor, but the 5700... that must just be nuts.

Right now it is listed for about $70 (30% off) on the site to buy it and I would be tempted to do it just to see what it was like, but the $40 shipping is crazy... Now I need to find 3-4 more people willing/nuts enough to share shipping so I can try and order one of these to motors to find out :lol:

What's the story with the new Reventon Pro 1.1 Ex? Any advantages over the old Pro 1.1?