Have to decide if you want a multipurpose ESC so you just buy one. U have PM.

I had a little scare with an update fail on my Reventon Pro (original). It has been a while since I updated things so thought I would do it before next weeks race. After fumbling through the goofy software and instructions I finally managed to get the LCD box updated to 2.7. Good deal, step one done. Next got it connected to ESC and started to upload the latest Mod2 profile. It got about half way done then got a dreaded update fail. Then of course the speed control wouldn't connect anymore. Nothing worked. So started messing around and reverted back to the 2.5 program card firmware. Was thinking the Latest Mod 2 didn't like to update with the 2.7 card software.

Well at first that didn't work trying to upload Mod2 with Card software 2.5. I got to this point by saying no to connect esc then hit the firmware button. Since the speed control was connected it gave me a list of profiles for the speedo. So I try a different profile, Stock0. It loaded. Then went and tried loading Mod2 and it also loaded and it seems to be ok now. Last thing I put 2.7 back on the program card since it is needed for some of the custom percentage settings.

So far so good, thought I bricked it. But I think it is alive again. Just writing this in case someone else comes across a semi bricked speed control when trying to update.

can anyone hook me up with a part number for replacement fans for the Reventon Pro (original) all I can find are the ones for the 1.1 and can't seem to figure out if they are the same. Any help would be great!

When you turn on the interface, press the "S" button and go to the SAFE MODE and reinstall the software to the ESC, that should work....

Next time, you can try hit the "S" button and go to the SAFE MODE on the interface and do the software update again...

So, you unbrick your ESC by using the V2.5 version of the LCD card and somehow that unbrick the ESC....? That is good to know...

Part No.# EXA93301-CF25

http://www.speedpassion.net/us/produ...301-CF25&c=OPT

Ya I didn't know about the Safe Mode. But only the Stock0 profile would load at that point with 2.5. Then Mod 2 loaded with 2.5. I haven't tried anything software wise past that, just left speedo as is then loaded 2.7 back on the card.

What are the differences between Mod0, Mod1 and Mod2?

Jason I didnt care for mod2, it has a soft bottom end and a strong mid to top pull. Mod1 has been the smoothest ive used so far.

I have been offered a gt 2.0 esc for a nice price , but I do have a question. Is it possible to program this GT esc with a Reventon pro lcd box ? I have the impression that you cannot, but I have never tried either . Has anyone else tried or done it ?

You cannot use the Reventon programmer box with the GT Pro ESCs

nope. Got both box types here.

However, if you want to save a buck, it is possible to use a hobbywing box. just flash the box with speed passion software. This however is NOT supported by Speed Passion so any issues, you will not receive help on it.

But, its what I have sitting here as at the time coudl not get the Speed passion box.

I have HW firmware on my gt pro, muhaaaa

Ok , interesting . Cain , I have a Hobbywing box . Do you have any Idea if it will program the Hybrid boost timing functions ? I recall having to use a particular firmware with the Reventon to do that

new to SP. looking at a SP reventon pro, assume this will work in my sct 4x4 since its 140a? im using a HW sct pro now and its 120a continuous. also, my motor is a revtech 4800kv.
OK to use? I emailed support 3xs with no response. : (
thx!!!

This is the best place to ask because the website support is absolutely worthless.. I've emailed many times also and to no avail