|
Originally Posted by wingnut73
(Post 9659288)
Hey guys, I have a VTX10 8.5t combo that I am having trouble with. I got the radio calibrated and all the lights are doing the right thing, but I am getting nothing from the motor. I tried to spin the spur and I get a stutter from the motor but that is it. ESC got really hot fast trying to figure it out so I figure I would ask y'all. Any Ideas?
|
I am using a Fly Sky GT3b. I am soldering connectors to try another motor. I have tried 3 sensor wires so far. I checked them all to make sure they were good with a VOM. Thanks for all the input guys!
|
ESC runs other motors just fine. Motor must be shot. thanks guys!
|
Originally Posted by wingnut73
(Post 9659677)
ESC runs other motors just fine. Motor must be shot. thanks guys!
|
whats the max safe temp on the 4.5xl motor? i am running mine in a scte with a 14tooth pinion, endbell timming at 30 degrees, no esc timing, ind0or clay track and after a 7 min main it comes off at between 168-175.
Great motor by the way. way more torque than the epic 550 i used to run. |
The guys say to Disable the motor cutoff temp, and to the esc temp to 220-240.. so your temps are right in the good range.
|
Originally Posted by SaladFork
(Post 9648164)
Hey Bobby, I don't run buggy so I am clueless when it comes to buggy setups. I did however send an email out to a few guys on Team Viper for some help. If you want to PM me your email I will send you the settings once I receive them.
The wires are per-installed with high capacity bullet connectors. And bullet plugs on the ESC plug and play. The wires do come out of the motor (like in the 3D render). You can trim the wires as needed. :nod: |
Originally Posted by Jtipsy
(Post 9661414)
Thank you Salad, any pics of the new esc yet or still holding those for yourself.
|
Just do it NOWWWWWWWWWWWWW :D:D:D:D:D
|
Well I just sold my Tekin 4600. Now its time to wait for the 4 pole 550's. Hopefully the sensored ones don't take to long.
|
Is the VTX10 ESCs compatible w/ 1S lipos?
|
vtx10 v port
led on v port aren't on.hook up to progauge to try set speedcontoll and all that comes up is connect failure. it does shut off and on but seems to be stuck on profile 2.when turned on it will beep.any clues what to do.thanks lance
|
Originally Posted by JamesL_71
(Post 9663992)
Is the VTX10 ESCs compatible w/ 1S lipos?
Originally Posted by olegeezer
(Post 9664007)
led on v port aren't on.hook up to progauge to try set speedcontoll and all that comes up is connect failure. it does shut off and on but seems to be stuck on profile 2.when turned on it will beep.any clues what to do.thanks lance
If you still can't get it, PM me your phone number I will give you a call and see if I can help. :nod: |
Originally Posted by SaladFork
(Post 9664016)
Negative, 2-3S only on the VTX's.
Any updates on the 1S ESC? I see pics of it on the facebook page from back in Jan, but cant find any other info... |
Originally Posted by JamesL_71
(Post 9664038)
I should have spent more time reading thru the thread...
Any updates on the 1S ESC? I see pics of it on the facebook page from back in Jan, but cant find any other info... |
| All times are GMT -7. It is currently 02:35 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.