R/C Tech Forums - Houstons Engine Service H.E.S.

i would recommend 086hs for buggy or if you are using it in truck the 053mr

2057 not so bueno on nova engines ;)

sorry for the delay on the engine as i had to rebuild truck and buggy to brand new condition with some high dollar lunsford titanium screw kits , Kelly ROCKS!!! literally , hes in a band :lol: Lunsford products are also of the highest quality PERIOD!!!

Thanks alot, 086 it is. Looks like I will be selling the 2057. Any idea what motors do work well with the werks 2057, besides the werks engines?

Ambros303

04-30-2011 04:13 AM

LM manufactured engines: Sirio and Orion (Alpha line), probably Reds and Nvision aswell.

Dave De Voe

04-30-2011 10:42 PM

MISSING H.E.S.

sure missed you today big buddy:tire::tire::(. hope to see you in Lebanon at a club race by the way truggy motor is nutts:D:nod::nod:

Trevor Williams

05-01-2011 08:18 AM

braaaap...

:p

houston

05-02-2011 10:20 AM

Good times with the X7's this weekend:nod:

Truggy - 9853ss/41021 ,c5tgc , 7mm, 225°, 65° ambient, low humidity, mucho power everywhere! :nod:

kgombe

05-02-2011 10:22 AM

schweet.. you back to using the nova plugs now... i have a bunch of Od 97t that i intend to use... how different is the performance difference??

SDelaney

05-02-2011 10:53 AM

I got an engine from a guy on here that was modded by HE'S. It is a Nova 21 Plus 4. I am running 30% Byrons but I need to know what shim and plug I should run in it. Right now it has no shim???

houston

05-02-2011 06:48 PM

Quote:

Originally Posted by SDelaney (Post 9050271)

I got an engine from a guy on here that was modded by HE'S. It is a Nova 21 Plus 4. I am running 30% Byrons but I need to know what shim and plug I should run in it. Right now it has no shim???

I am sure it has the stock shims, it should anyway

If so leave it, run any of these plugs, novarossi c5tgc, c6tgc, odonnell 97t

Who did you get the engine from? is it in good shape?

SDelaney

05-02-2011 08:52 PM

Quote:

Originally Posted by houston (Post 9052323)

I am sure it has the stock shims, it should anyway

If so leave it, run any of these plugs, novarossi c5tgc, c6tgc, odonnell 97t

Who did you get the engine from? is it in good shape?

I looked at it again and it does have the stock shims. I got it from AndyD8 I believe and it was in good shape until this weekends club race... Something changed since my last practice and it was cutting in and out - bogging and then taking off. Some of the guys were saying I had an air leak so I am gonna take the carb out and seal it as well as teh back plate and carb screw.

Any other thoughts?

Houston - how much do you charge to look an engine over if the sealing it doesn't work?

kgombe

05-02-2011 09:10 PM

look at the tank first... see if there is a leak on the tank.... and also how old is your fuel

hambone

05-02-2011 10:06 PM

Quote:

Originally Posted by kgombe (Post 9053115)

look at the tank first... see if there is a leak on the tank.... and also how old is your fuel

Glad to see ur not trespassing on other threads. Lol

kgombe

05-02-2011 10:22 PM

Quote:

Originally Posted by hambone (Post 9053353)

Glad to see ur not trespassing on other threads. Lol

:D:D dont want to get that forum beat down now...:eek::lol:

Teufel Racing

05-03-2011 12:47 AM

Monty,

Ran our first race of the season at the local track. That XLT is running perfect. Made some guys want one. LOL. Still got that C6T plug I put in there in Az. Got to clean it up from the race, but still looking good for now. I did get to see Sy run his. Man I think mine might have to get some love. Looked real good and seemed to have the right power everywhere.

Saw something about a new Nova pipe on Neo buggy, any info? Just wondering.

All times are GMT -7. It is currently 11:04 AM.

Page 349 of 595

349

Show 40 post(s) from this thread on one page