R/C Tech Forums - Houstons Engine Service H.E.S.

hi bro....I was just looking at the NR pipes and thought I'd ask you why NovaRossi never have released a 9886 in super strong? Does it have something to do with wall thickness and pulsations? Are the 9886 even available anymore? I'll be more than happy with my Dyn086 with the 3 port as my last similar setup really hauled the mail quite well on a small/medium track.....I was just curious on the 9886 thingy :D

i can only speculate why , who knows :D

novarossi does what they wish , if they release the super strong version of the 9886 i think a few people would rejoice !! :lol: the 9901ss works very well also and gets really good mileage but its not a budget pipe ;)

Trevor Williams

04-26-2011 10:28 PM

gotcha....lol

houston

04-27-2011 02:24 PM

Quote:

Originally Posted by Trevor Williams (Post 9024953)

gotcha....lol

not much from novarossi is "budget" ;)

jonw	04-27-2011 02:48 PM

You got my 4 star vote!

dakilo

04-27-2011 03:06 PM

5 star vote from me :nod:

houston

04-27-2011 06:04 PM

You guys rock!

Bob Carr please call me

Ultraspeed84

04-27-2011 07:47 PM

We got it under control now... 6.5mm rest 210 deg and 9.5mins..

houston

04-27-2011 11:39 PM

Quote:

Originally Posted by Ultraspeed84 (Post 9029519)

We got it under control now... 6.5mm rest 210 deg and 9.5mins..

Only 9 1/2 min.? Hmmm interesting

Ultraspeed84

04-28-2011 12:50 AM

HSN is at 2/3/4
LSN is about half turn in from flush.

houston

04-28-2011 06:36 PM

items ordered the week of the 25th will ship on 5-1 or 5-2 i am at a race until then

thanks guys,
Monty

hambone

04-28-2011 08:24 PM

Monty, i'll order 2 bearings from you tomorrow morning. I've been spaced from 3rd shift, lol. Need a front and rear.

bevofrancis

04-28-2011 08:41 PM

I ordered a 21-4t from you last night. The pipes I have are an 053, dynamite 086 and a werks 2057 with the extender. Which one of those do you think would work with that motor the best? If the 2057 would be a good choice, do you think I should go with or without the extender?

RayA	04-28-2011 08:57 PM

Package arrived 2day

Quote:

Originally Posted by houston (Post 9034318)

items ordered the week of the 25th will ship on 5-1 or 5-2 i am at a race until then

thanks guys,
Monty

Serviced piston+sleeve sets should be delivered you Monday 5-1. Please note the detail set #3,as it require a little more finesse than the others. How's that for timing? LOL
RayAracing

houston

04-28-2011 11:11 PM

Quote:

Originally Posted by RayA (Post 9035055)

Serviced piston+sleeve sets should be delivered you Monday 5-1. Please note the detail set #3,as it require a little more finesse than the others. How's that for timing? LOL
RayAracing

you are so sweet Ray :nod:

thanks a million for being THE BEST at what you do , hands down!!

houston

04-28-2011 11:16 PM

Quote:

Originally Posted by bevofrancis (Post 9034975)

i would recommend 086hs for buggy or if you are using it in truck the 053mr

2057 not so bueno on nova engines ;)

sorry for the delay on the engine as i had to rebuild truck and buggy to brand new condition with some high dollar lunsford titanium screw kits , Kelly ROCKS!!! literally , hes in a band :lol: Lunsford products are also of the highest quality PERIOD!!!

All times are GMT -7. It is currently 07:43 AM.

Page 348 of 595

348

Show 40 post(s) from this thread on one page