![]() |
Originally Posted by JoePit
(Post 10857802)
Comp Heater In Phoenix already scheduled for delivery tomorrow. Just in time for the race!!! Thanx again Monty for your services, and answering my texts. The industry is real fortunate to have guys like you around.
Nick , make sure you have a good throttle return that pulls carb COMPLETELY closed ;) leave .5mm at least gap between throttle pull on servo arm and collar stop |
I've decided on a 4btt, what pipe/ manifold would you recommend? Thanks again!
|
Originally Posted by B00t13g
(Post 10858024)
I've decided on a 4btt, what pipe/ manifold would you recommend? Thanks again!
|
Found my problem with the bog, clutch shoes weren't fully engaging. Looking at the small contact area I would've thought these would slip like crazy.
This is after a 30 minute main. http://i1121.photobucket.com/albums/...r/IMAG1129.jpg |
What clutch is that?
|
Hot Bodies flywheel and bell with Agama shoes. Apparently the shoes are Mugen style and the clutch bell is Kyosho style. They don't mate well obviously. LoL.
|
Well I didn't find my bogging problem. Got new "matching" flywheel, shoes, and bell. Same deal. Just don't have any torque first 5 feet out of the corners. The X7 seems to be running good but just lacking that oomph out of corners. Weird.
|
Chris, check the underside of the head button to make sure the plug is seated correctly. You may have accidentally cross threaded it. Been there done that.:tire:
|
Originally Posted by rider313
(Post 10863892)
What clutch is that?
Originally Posted by air8
(Post 10864824)
Well I didn't find my bogging problem. Got new "matching" flywheel, shoes, and bell. Same deal. Just don't have any torque first 5 feet out of the corners. The X7 seems to be running good but just lacking that oomph out of corners. Weird.
That is assuming u have not done this already that is. I also had issues with this with one of my x7 and it turned out to be a air leak in the carb, sealed her up and she was golden. |
Thanks Monty!!!!
|
Thanx guys. Soon as track dries today I'll see what's up. Jason I actually did check that last night. Plug is sitting perectly in there.
I found where the new clutch shoes were rubbing...barely...on the clutch bell. So I added more shimming and it seemed yesterday. But I need to get it fired up today and see where I'm at. |
Well the bog I was whining about is was all gone today. Everything was flawless with that engine. However my buggy with BTT developed a bog but I think that is fuel tank related. The buggy was super dialed Friday and part of today. I actually was headed for pole position in Rd. 1 and 2 till I caught lap traffic.
Round 3 and then the main just the car just started developing a bog. I uad swapped to a Losi tank for practice but that was an old tank and the seal was dried up. I'm just not sure if my tune was barely off, or I had tank issues. |
Originally Posted by air8
(Post 10869024)
Well the bog I was whining about is was all gone today. Everything was flawless with that engine. However my buggy with BTT developed a bog but I think that is fuel tank related. The buggy was super dialed Friday and part of today. I actually was headed for pole position in Rd. 1 and 2 till I caught lap traffic.
Round 3 and then the main just the car just started developing a bog. I uad swapped to a Losi tank for practice but that was an old tank and the seal was dried up. I'm just not sure if my tune was barely off, or I had tank issues. |
Originally Posted by Dave De Voe
(Post 10867335)
Thanks Monty!!!!
hope you had a good time:tire: i was very happy with my new X5 lightning Xtreme "TEAM" edition in the buggy , bbi and 1/2 gallon , still tight as frogs asss !! ugggh :lol: should be ready for boise,id NCT , ran flawless :nod: thanks for the pitting btw til next time |
Was looking forward to pitting you in the A-main....and fun is what it's all about!!!
|
| All times are GMT -7. It is currently 05:44 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.