Originally Posted by 20 SMOKE (Post 9361018)

do you have calipers

Originally Posted by RedBull99 (Post 9360033)

Hopefully someone here can help!
I am not new to the hobby, but I havent ever had this problem so im hoping someone can help me out.
In my sc10 I just got I took it outside today to try it out after i bound my remote to it and got my electronics put in it. But it was making a barking sound. so i tightened up the diff, went back out and it was still making a barking sound...so i loosened it up a little more and it was just slipping way to much...so i tightened it back up and went back out, but it was still doing it. Then i took it all apart rebuilt it, put it back together and still doing the same.
So i moved on to the slipper(i am not very familiar with trying to set these)
I loosened it up, and it was just slipping way too much..then i kept tightening it more and more and more and it still continued to bark. The only other thing I am wondering is if the slipper pads, or the slipper pad holders maybe need replaced? would that be causing the problem? Hopefully someone can help! Ive been going crazy today trying to figure it out!
Thanks,
Matt Beckham

Originally Posted by specc (Post 9361373)

I have read various posts in this thread but have not been able to find the exact answer that i am looking for. Please help =)

Situation:

I have an FT SC10 (2WD of course) and a SC10 4x4, and would like to be able to use the same wheels and tires on both of them.

Possible solution:

Purchase the following items for the FT SC10

Pro-Line 12mm Wheel Adapters (SC10) [PRO6064-05]

Pro-Line Front Inboard Hub Kit (SC10) [PRO6068-00]

And use these wheels for the FT SC10 and SC10 4x4 -> Pro-Line "ProTrac" Split Six 2.2/3.0 Front/Rear Wheels (Black) (2) [PRO2723-00]


Can anyone confirm that this will give me what i want? If not, can you tell me what will =)

Thanks in advance.

Originally Posted by Matt Howard (Post 9361490)

Yes, I use that exact setup to use the same wheels between my SC10 and SC10 4x4.

Originally Posted by Asharus (Post 9361408)

I'd wait until the AE front hexes come out. The part numbers are already out and says mid July for stock. Then use JC hex adapters for the rear and use 12mm JC Rulux wheels for both trucks.

Originally Posted by Wild Cherry (Post 9361504)

Got my Ae hex's yesterday....:cool:

Originally Posted by Wild Cherry (Post 9361504)

Got my Ae hex's yesterday....:cool:

Originally Posted by 20 SMOKE (Post 9361558)

part #

Originally Posted by motofreak32 (Post 9362040)

Anyone know if AE will becoming out with a SC10 DB in the near future? I have all AE stuff and dont want to jump on the bandwagon by getting one of the other brands.