geeunit1014

iTrader: (14)

Yes they are

BMenard17

iTrader: (88)

Thanks

X14

iTrader: (1)

It was totally dialed in the main. Not really sure how my motor compared to the two leaders but one of them said I was catching them. Unfortunately I got too far back early on to dice it out with them but a 3rd place finish with a bunch of great 17.5 racers was fine for me first time out racing sedan in 8 years

Can't wait to run mod in the near future

I will try the Team Powers 36R tires[/URL] next time to see how they do since they are the Reedy tires.

Later[/QUOTE]

tnx for posting... your car rans like mod and TP might hav some grip since most of the guys on track were running those tires.

littlealex

iTrader: (86)

tnx for posting... your car rans like mod and TP might hav some grip since most of the guys on track were running those tires.[/QUOTE]

would you please show your setup for reference?
did you ran on carpet?

Infinite 12th

iTrader: (3)

X14 messed up his quote of my post

It was asphalt in Northern California at Norcal-Hobbies

Here is the 17.5 blinky setup again

JustWill75

I race with a lot of xray and serpent drivers and talk of low friction super flexible drive belts came up. Do you really notice a diffrence between belts and who makes one for the TC6

M.Abramowicz

iTrader: (1)

front belt => trf 416

rear belt => use ae

I do not see difference for softer belt from trf or yokomo at front
it lost tooth on hard breaking in modified

regards!
m

RAL

iTrader: (67)

Rick will the Team Bomber ones fit for the BD5?

http://www.rc-race-and-drift-japan.c...oducts_id=2661

Bappe

ill try to ask again, hate to race with the car and not having any spares in the box (there is no local hobbystore where i race..)

since there are no tc6.1 parts in stock anywhere, what "old" tc6 suspension parts fits on the car?

really needs a answer so ican order some spares.. or does anyone know any onlinestore that has the 6.1parts in stock?

wcalaker

iTrader: (1)

I gave some T6 Chubs to a guy who needed them for his 6.1 He made them work. I dont think anything else will work but im not sure. I know the arms and steering blocks were changed as well. Im not sure if you can use the rear hubs either...probably but you would have to account for the toe angle.

Good luck...its sad when we cant get AE parts .....its one of the reasons i went with the TC6.

Kensei

You mean grind the shaft a little with a Dremel tool?
So that there is more flat spot towards the motorcan?
And therefore the pinion can be put further on the motoraxle?
Just checking, because English is not my native tongue.

Are there pinions that can be used without any grinding or other alterations?

Anybody any experience with these LiPo's?
http://www.rc-mushroom.com/product_i...n-case-p-23725
They are a bit on the heavy side, 316 grams. Would that be a problem as to being as close as possible to 1,350 grams for the car raceready?
Or better not to touch them and go for IP or Orion or so?

Bappe

yes, just dremel the flatspot so it is closer to the can, i did this to have more clearence between the pinion and the belt, i use 3racing, robinson and rw pinions... 30sec job and youre done! just make sure to cover the holes on the motor so the metal dust dont get in there!

Jochim_18

iTrader: (10)

Does anyone make aftermarket chassis and topdeck for TC6?

pressure

iTrader: (3)

Mike Haynes National Champion runs his TC6.1 for the first time at 360 V2 raceway in New Roc NYC

http://youtu.be/JOnqnxh-3ok

or8ital

iTrader: (38)

Does anyone know if the xray rear body mounts fit the TC6? Thanks.