3Likes

Tamiya TRF415

Reply Subscribe

Thread Tools

Search this Thread

02-22-2007 | 12:20 AM

#17671

kewdawg

Tech Elite

iTrader: (3)

Joined: Feb 2004

Posts: 3,322

From: Sneederville, USA

Quote:

Originally Posted by peejay

The springs that Tryhard listed are standard length, or long if you wish. There was a set of a pair of each red/yellow/blue short springs sold under part #53333 and there are short springs available sold in pairs:

53630 Soft
53631 Medium
53632 Hard
53633 Extra Hard

HTH

Thanks for clearing that up.

02-22-2007 | 06:08 AM

#17672

tamiyarcracer

Tech Master

Joined: Jan 2003

Posts: 1,633

From: Auburn, WA

Quote:

Originally Posted by peejay

However the 53333 set is even softer, these springs are what was used in the TA02 - TA03 days. or they are what the DJ Pro Module suspension uses.

02-22-2007 | 06:49 AM

#17673

racer43

Tech Apprentice

Joined: Aug 2006

Posts: 58

suspension mounts

which suspension mounts do i need to change the suspension of my trf415 mre?
in other words, which one for the front and which ones for the rear.
is a little confusing with the tamiya lettering system

02-22-2007 | 06:55 AM

#17674

nikkiesteban

Tech Master

iTrader: (5)

Joined: Apr 2005

Posts: 1,676

can i put spool and direct pulley on 415(1st version).???
have any of you guys tried putting it?

02-22-2007 | 07:19 AM

#17675

peejay

Tech Apprentice

Joined: May 2005

Posts: 92

From: UK

Quote:

Originally Posted by tamiyarcracer

However the 53333 set is even softer, these springs are what was used in the TA02 - TA03 days. or they are what the DJ Pro Module suspension uses.

DJ Pro Module uses springs that used to be found in the 53163 set, also from the TA02/03 days, which are normal length.

HTH

02-22-2007 | 09:06 AM

#17676

GuyIsDamGood

Tech Fanatic

Joined: Jul 2006

Posts: 794

From: Brooklyn, New York

Hey tamiyarcracer; you sound Very Sure that the Tamiya Turnbuckle Wrench(53602) will fit those Tamiya Turnbuckles. -I`ll take your word. -I`ll order that Turnbuckle Wrench.

Thanks

Take Care

02-22-2007 | 03:57 PM

#17677

Burlap

Tech Master

iTrader: (6)

Joined: Jan 2004

Posts: 1,285

From: Melbourne, Australia

Quote:

Originally Posted by racer43

I guess you are asking about the toe blocks. Go to Tryhard's link here: http://www.thard.co.uk/
Under Excel Spreadsheets is a toe block sheet that will tell you what combination of blocks will give you what degree of toe.

02-22-2007 | 09:02 PM

#17678

kewdawg

Tech Elite

iTrader: (3)

Joined: Feb 2004

Posts: 3,322

From: Sneederville, USA

Quote:

Originally Posted by tamiyarcracer

However the 53333 set is even softer, these springs are what was used in the TA02 - TA03 days. or they are what the DJ Pro Module suspension uses.

Thanks for the addl. info. Good stuff!

02-22-2007 | 10:38 PM

#17679

Racing4Evo

Tech Elite

iTrader: (2)

Joined: Sep 2002

Posts: 2,118

From: SoCal

What part number is the plastic direct drive center pulley that comes with the MRE? I'm looking for that to put on my MSXX.

02-22-2007 | 10:39 PM

#17680

tamiyarcracer

Tech Master

Joined: Jan 2003

Posts: 1,633

From: Auburn, WA

Quote:

Originally Posted by Racing4Evo

What part number is the plastic direct drive center pulley that comes with the MRE? I'm looking for that to put on my MSXX.

Look @ post 17651 back a page.

02-22-2007 | 10:40 PM

#17681

chris_morrison_

Tech Regular

Joined: Jul 2004

Posts: 364

From: victoria canada

center shaft 3454395
pulleys 51213
e clip 50589

02-22-2007 | 11:22 PM

#17682

Racing4Evo

Tech Elite

iTrader: (2)

Joined: Sep 2002

Posts: 2,118

From: SoCal

Quote:

Originally Posted by chris_morrison_

center shaft 3454395
pulleys 51213
e clip 50589

Thank you for the quick reply Chris!

Now, where can I get these in the US by internet preferably?

02-23-2007 | 12:25 AM

#17683

pug 205 gti

Tech Regular

Joined: Jan 2007

Posts: 362

From: england uk

Quote:

Originally Posted by GuyIsDamGood

Hey tamiyarcracer; you sound Very Sure that the Tamiya Turnbuckle Wrench(53602) will fit those Tamiya Turnbuckles. -I`ll take your word. -I`ll order that Turnbuckle Wrench.

Thanks

Take Care

like i said in previous post it works a treat