3LikesTamiya TRF415
06-23-2005 | 05:53 AM
#9226
well.... broxtowe is very bumpy with big curbs...so that could explain that (then again only had a few rolls, and didn't fly off the "yump" once all weekend 
). However, Bedworth is really smooth, and no walls, after one run with the blades, they were showing real signs of wear.
The other thing is I'm only running 27t stock, so the loading should be less than with a mod, I just can't figure it out.
Errrr, help....
Ed
). However, Bedworth is really smooth, and no walls, after one run with the blades, they were showing real signs of wear. The other thing is I'm only running 27t stock, so the loading should be less than with a mod, I just can't figure it out.
Errrr, help....
Ed
06-23-2005 | 03:52 PM
#9234
Tech Fanatic
iTrader: (1)
Joined: Nov 2001
Posts: 997
From: Somewhere on earth
Originally Posted by Hugo
Great to have these pics!!!
I think he uses 3mm chassis.
Do you know what are these springs?
Also the front shaft and wheel axle looks very different.
I think he uses 3mm chassis.
Do you know what are these springs?
Also the front shaft and wheel axle looks very different.
06-23-2005 | 04:37 PM
#9237
Originally Posted by Ballsie
Is that a Xenon racing stand with a tamiya decal or is it a tamiya stand?
Either way - where can I get one????
Either way - where can I get one????
steve has them here:
http://www.speedtechrc.com/store/ebp...id=386&id=4805
it comes in "yokomo blue" and "tamiya blue"...and yes there is a difference.
tamiya stands were a 49xxx part #..so they are out of production. just purchase a xenon stand...and slap a tamiya sticker on there
forgot to add.. the tamiya stands have the holes so you can place your shocks in there when rebuilding them. unfortunately, the xenon stands do not have that feature.
06-23-2005 | 05:09 PM
#9238
Tech Master
Joined: Jan 2003
Posts: 1,633
From: Auburn, WA
THe chassis plates I saw at Reedy were 2.5 mm think but cut like the original 415. with the wider susp mount spacing. Also we were told they were a different weave of Carbon Fiber, which was as stiff or stiffer than the 3.0 mm decks
06-23-2005 | 06:07 PM
#9239
Tech Fanatic
Joined: Feb 2004
Posts: 842
Originally Posted by Hebiki
tamiya stand with a tamiya sticker. xenon stands are square in shape (tamiya stands have the slanted sides)
steve has them here:
http://www.speedtechrc.com/store/ebp...id=386&id=4805
it comes in "yokomo blue" and "tamiya blue"...and yes there is a difference.
tamiya stands were a 49xxx part #..so they are out of production. just purchase a xenon stand...and slap a tamiya sticker on there
forgot to add.. the tamiya stands have the holes so you can place your shocks in there when rebuilding them. unfortunately, the xenon stands do not have that feature.
steve has them here:
http://www.speedtechrc.com/store/ebp...id=386&id=4805
it comes in "yokomo blue" and "tamiya blue"...and yes there is a difference.
tamiya stands were a 49xxx part #..so they are out of production. just purchase a xenon stand...and slap a tamiya sticker on there
forgot to add.. the tamiya stands have the holes so you can place your shocks in there when rebuilding them. unfortunately, the xenon stands do not have that feature.
06-24-2005 | 12:17 AM
#9240
TRF415MSX Again
Found a few more pics of the MSX, this time Marc's car from the Euro Reedy Race.
Check them out at http://www.e-image.dk
Check them out at http://www.e-image.dk