![]() |
8 weeks? :(
Pitty you can't just upgrade the firmware/software using you computer via a $20 USB device like the castle creation bushless speedies. Would of saved a lot of headaches. |
I NEED 3 RECIEVERS... WHERE CAN I FIND THEM?!?!? -JB
|
Originally Posted by JayBee
I NEED 3 RECIEVERS... WHERE CAN I FIND THEM?!?!? -JB
|
THANX... -JB :D
|
Spektrum (via Losi) replaced my original receiver in about 5-10 minutes on Wednesday while at SoCal Raceway testing. The new one with modified boards is perfect. I have nothing but praise for these folks.
RC Tech in Daly City, CA (650/992-7600) has just received two NEW Spektrum receivers for me; so, I assume that a supply just became available. |
rIgHt On
|
Is there a release date for the M11 spektrum???
|
ok i have tryed to get my ko propo 2344 pds servo to work with the spectrum and no go so installed a analog jr servo and the system binds and works fine. the problem im having is the servo will work after i bind the rx with the airtronincs servo and plug the ko in and the power is lost from time to time with that servo. any idea's
thanks |
Originally Posted by teamatlas
ok i have tryed to get my ko propo 2344 pds servo to work with the spectrum and no go so installed a analog jr servo and the system binds and works fine. the problem im having is the servo will work after i bind the rx with the airtronincs servo and plug the ko in and the power is lost from time to time with that servo. any idea's
thanks needs more power!!! try a cap |
Originally Posted by teamatlas
ok i have tryed to get my ko propo 2344 pds servo to work with the spectrum and no go so installed a analog jr servo and the system binds and works fine. the problem im having is the servo will work after i bind the rx with the airtronincs servo and plug the ko in and the power is lost from time to time with that servo. any idea's
thanks Bill |
Bypass the ESC and ko propo 2344 pds should work fine. Just dont forget the diodes to drop the voltage 8)
|
Originally Posted by JRX-S Bill
Had the same problem. Installed caps on QC2 ESC and Spectrum receiver with no good results. Gave up on the KO 2343 servo and went with Airtronics. No problems encountered with the Airtronics.
Bill |
Originally Posted by HarshGuy
Bummer ..so you never got the 2343 to work :( ....mine works fine ...but with a KO VFS1 speedo.
|
Just so that people aren't throwing out their 2343s... mine is working fine with my QC2 and spektrum (latest software) and a 4700uf cap. :)
|
Originally Posted by Bob Nilsen
Just so that people aren't throwing out their 2343s... mine is working fine with my QC2 and spektrum (latest software) and a 4700uf cap. :)
Didn't have to throw it out...The very friendly hobby shop I got it from took it back with a full refund. Otherwise, I like KO products...I have a Helios radio and love its ergonomics with the angled steering wheel for my Spectrum. Bill |
| All times are GMT -7. It is currently 06:41 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.