Originally Posted by skyflyer (Post 10584616)

Hi!

I'm new to Citrix ESC. A local competition has specified this ESC to use with 13.5T motors and I was on a race on Monday and on the last final heat, the ESC stopped working after 1 minute of racing. I was using it with LRP ERASER stock spect 13.5T motor.

When I turn on the ESC, the light goes on, but BEC (power to reciever) is not working. The fan is not turning. The ESC did not overheat (after 1 minute of racing, the outside temp was 13deg C).

Any ideas what went wrong and what to do? I suppose this should be fixed under warranty?

Thanks,
Miha.

Originally Posted by Carranza76 (Post 10585278)

I am new so info would be great and sorry for the "dumb" questions.

I am about to get a Tekin 17.5 motor and a Speed Passion GT 2.1 ESC how well will these work together?

I will be running it in my Losi XXX-SCT RTR on a HobbyPeople 5000mAh 35c battery.

Originally Posted by Solara (Post 10585325)

Not asking question before buying any of your gears, that is DUMB.

I am sure TEKIN is a good motor, but why not try the SPEED PASSION MMM 17.5 motor...? Multiple Europe Championships and 2X World Champion...can't go wrong with that.

http://www.speedpassion.net/us/catagory.asp?c=mtr&sc=45

At least you choose a good ESC, the GT2.1 ProStock is a great ESC.

We have couple SCT 17.5 setup on our website....take a look.

http://www.speedpassion.net/us/escsetup.asp?page=2&t=1

Originally Posted by Carranza76 (Post 10585344)

I am new to the Hobby and I am getting at a great discount deal from a guy who runs our local track and who I trust but I just need to put my mind at ease is all.

I am getting both installed for under 200.

I will give your motors a try once i get a new truck which maybe in the next 6 months as my 4 year old son has decided top take mine over!! lol

I just started this hobby at Christmas 2011.

Originally Posted by russp (Post 10588669)

Hey carranza, I run at the same track as you, if you need any help with that setup let me know. All I run is stock, also pro 2 with 17.5 boosted.
Speed passion is all i know. You'll love it. And if your getting your gear from who I think your getting it from.....your all good.
Any question hot me up, I can help you with a blinky setup or boosted settup. I ran tekin on my 2.1 for about a year
Look for my pink and purple cotton candy truck or maroon truck,
I'm Russ

Originally Posted by arevir (Post 10589043)

do anyone know the Kv rating for the Crawler Master-L Motor?
http://www.speedpassion.net/us/produ...SPCML205&c=MTR
Thanks!

Originally Posted by savannahmick (Post 10600135)

I have recently purchased a SCT Master esc and Compv3 17.5 motor for my SC10FT and I have had no problems with the setup at all other than running about 150f-155f after 10 min main 28/75 gears (AE recommended gear). Should I drop a pinion or is it alright to run the SP v3 17.5 at those temps because I really need the top end for a jump at my local track. I want the motor to last for awhile but also need to get every bit of power to be competitive in the class. Thanks!

Originally Posted by kwiksi (Post 10601014)

Your gearing is a bit off. It's better suited for buggy. Go bigger on spur like 81,83, or 85 and check temps.