R/C Tech Forums - Speed Passion Thread

In most cases you should be fine depending on your lipo packs capacity. Some radios, such as the 4PKS, have a timer feature that vibrates after a specified time period as a reminder.

benz190e

10-23-2012 07:36 AM

Quote:

Originally Posted by Nexus (Post 11332144)

Where in IL do you race?

If you are local to me I have the basic programming box you can have. It is not the LCD version, but it's free if you are one of the local tracks I race at.

This version is the one I'm talking about...

http://c456141.r41.cf0.rackcdn.com/i.../spascpb01.jpg

i race at leisure hours or time warp its an hour+ for me to get to either, depending on what time i get done helping a friend move on saturday 10/27/12 i can meet you at either

kerby

10-23-2012 07:59 AM

Quote:

Originally Posted by KSimmonds (Post 11358115)

I had this same problem with my brand new reventon pro in my b4.1. I tried 3 different motors and shutting off the voltage protection and the temp as well. None of those things helped. It would still randomly shut off and when powering back on would blink the protection code again. I sent mine back in for repair this week.

I will shut off the protection and see....odd thing I ran 2 heats and it was fine.

Breeze

10-23-2012 03:17 PM

Is anyone running a different cap with the reventon pro? I am trying to fit it in a durango and I can get it in but a smaller cap or one of those 3 or 4 cap banks would fit better

tony montana

10-23-2012 03:47 PM

sure some of you have read about my gt 2.0 pro not programming to my radio. Well the thing is it wont power my rx, but if I run a external bec it does turn on my rx. But it still wont program to the radio. Even with the bec hooked up when I just turn on the esc there is no lights that stay on, the red one blinks for a second. But if I go to program it by holding the set button the red led does flash like its suppose to. But when I click the set button for netural position, there is suppose to be a green light that flashes and that does not happen

trx450racer174

10-23-2012 04:24 PM

Quote:

Originally Posted by Breeze (Post 11359971)

Is anyone running a different cap with the reventon pro? I am trying to fit it in a durango and I can get it in but a smaller cap or one of those 3 or 4 cap banks would fit better

Can you extend the wires and make it fit better??

It is rather large. I was able to mount mine in a suitable place to make my install clean.

Breeze

10-23-2012 04:39 PM

I can extend the wire but I would rather keep the cap closer

trx450racer174

10-23-2012 04:44 PM

Quote:

Originally Posted by Breeze (Post 11360363)

I can extend the wire but I would rather keep the cap closer

Yeah hard call with that. I hated the cap on the Tekin and thought that was big and in the way. The SP one is a monster compared.

SRW141

10-23-2012 04:47 PM

Quote:

Originally Posted by tony montana (Post 11360133)

Tony, bring it to Mimi's on Saturday. I will take a look at it.

Breeze

10-23-2012 04:54 PM

I can fit the lrp works cap along side the esc or mount the tekin cap on the esc

kwiksi

10-23-2012 05:04 PM

Quote:

Originally Posted by Breeze (Post 11359971)

Is anyone running a different cap with the reventon pro? I am trying to fit it in a durango and I can get it in but a smaller cap or one of those 3 or 4 cap banks would fit better

I have a Reventon Pro in my DEX410V3 & DEX210...no probs fitting them.

Breeze

10-23-2012 05:11 PM

Do you have any pics of your install, and any tips on the settings and gearing for a 6.5. Yes I can fit it in , but if I could use a different cap I would like it better.

trx450racer174

10-23-2012 05:21 PM

Yeah i have been playing with gearing on my MMM17.5 in my Tamiya.

Anyone running blinky with a B4.1,RB5 or Dex210 and wanna share some gearing?????

kwiksi

10-23-2012 05:45 PM

Quote:

Originally Posted by Breeze (Post 11360494)

Do you have any pics of your install, and any tips on the settings and gearing for a 6.5. Yes I can fit it in , but if I could use a different cap I would like it better.

Here you go....used double sided tape to stick it behind the speedo.

http://i81.photobucket.com/albums/j2...t/IMAG0538.jpg

http://i81.photobucket.com/albums/j2...t/IMAG0537.jpg

micrors4guy

10-23-2012 05:46 PM

who stocks the reventon pro's and are located in the states?

All times are GMT -7. It is currently 07:45 AM.

Page 129 of 385

129