![]() |
Im confused about the stock vs mod software. They dont see much different. Is it just different boost/timing setup? Trying to understand why they run stock1 in 4wd SC
|
Originally Posted by dMITIj
(Post 11492221)
So if i look at your setup section: http://www.speedpassion.net/en/escsetup.asp?t=6
i can't see Jorn's setup for 4wd? only the old once. i have asked for 4wd Reventon Pro setup before and nothing happend? maby i look the wrong place? Best Regards. |
Originally Posted by AlanHall
(Post 11495818)
Im confused about the stock vs mod software. They dont see much different. Is it just different boost/timing setup? Trying to understand why they run stock1 in 4wd SC
Yes, all SCT 4x4 I see....all run boost = STOCK1. Mod software is more for 2WD and 4WD buggy as adding BOOST on them will not make it better to drive....not unless you have a track that is like a size of a NFL football field. Mod software only gives you static timing...a static curve increase of timing...STOCK1 will give you the shifting, dynamic and custom setting of the timing increase plus the BOOST (Turbo when it is WOT). You will not see much of a different IF your track is small....but once it is bigger, the different is more obvious. |
Oh ok. So your saying stock settings are more tunable and the mod settings are more just blasts of power? Im i understanding correct?
|
Solara: So what is the issue I would run into trying to use the Reventon Pro with a 4 Pole motor? Does it run inconsistently, not at all, etc?
I am curious to see how much more punch the blaze 2 Pole has than what we are seeing for 4 pole motors. How large is the rotor on it? |
Originally Posted by Solara
(Post 11495778)
Silver Arrow is for 3-4 cells use....for 1/8th E buggy, no reason to use that ESC on 2S powered SCT 4x4. |
what happens if you do try to use it on 2S? Does it not power on or act erractically?
|
Originally Posted by Cain
(Post 11496240)
what happens if you do try to use it on 2S? Does it not power on or act erractically?
|
I have a gt2.0 pro that needs the switch fixed. Will speed passion fix this for me?
|
Originally Posted by tom2tone
(Post 11485147)
Hey guys.. I was digging through my stuff and found this... SP V1 Silverarrow combo with lcd card. Still sealed and never used. Would this be worth anything?
Thanks http://i376.photobucket.com/albums/o...s/IMG_7694.jpg http://i376.photobucket.com/albums/o...s/IMG_7695.jpg Well I just tried to call support and I got their answering machine. I was able to find my receipt and I purchased my combo back in march of '09. Is it worth trying to see if I could get an updated combo or just pitch it? Thanks |
Why would you pitch it
|
The motor and programming box are probably worth something either way. Probably could get 70 to 80 out of those two items at least. Better than pitching. Surely someone with an over priced Orion speedo would want the programmer for 20 bucks vs paying 80 for the Orion box. lol same thing.
|
Originally Posted by Solara
(Post 11484026)
Make sure you have ALBERT to ship you a new caps...may be one or 2...you tell him HOWARD tell you to call him...thanks for sticking with SPEED PASSION
Howard |
Originally Posted by AlanHall
(Post 11496522)
Why would you pitch it
Originally Posted by RCmayor
(Post 11496743)
The motor and programming box are probably worth something either way. Probably could get 70 to 80 out of those two items at least. Better than pitching. Surely someone with an over priced Orion speedo would want the programmer for 20 bucks vs paying 80 for the Orion box. lol same thing.
I would rather not just throw it away but I have no idea what it's worth. I have no use for it and would rather get a few bucks for it. I'm going to try to call SP tomorrow and see where I get. Thanks guys.. :) |
I'm new to the Speed Passion ESC and I have a LPF 2.0 GT in my losi 22 with an orion vst 17.5t motor. Tonight was the first night I've run it so I was rather impressed the first few laps then all of a sudden it started running at about 1/2 power. Took it off the track and checked things and pulled the throttle and it seemed to run fine. Did a couple more laps and it went into limp mode again.
Battery pack was charged but I tried a different one to make sure and it did the same thing with that pack. The batteries are GenAce 30C 4000 mah 7.4V. I have a programming card on the way and was wondering if there is a setting that needs to be adjusted. I got the speed control used and all I could do is program it to my throttle. Please help? |
| All times are GMT -7. It is currently 09:18 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.