I'm geared at 13/52 right now in my SSC Slash with that coombo. I typically see around 125-140 on the motor, and under 100 on the ESC.

rule of thumb a lot of people use is 160 on the motor at the end of a run.

OMG- I would gear up one tooth, make sure vent holes were on both sides of the body to let air flow through. And if you run on a loose dirt track reduce Punch 10 points to help avoid wheelspin.

crusher- GOC - gave you a good answer there. I would only add to not run longer than the length of your races.

OK thanks the motor was at 110 degrees on a big 8th scale track and a cool day. I had it geared at 15/54 with my TRCE Slash and want just a little more top end speed so I'm going to go to 15/52 and keep an eye on the temps so it doesn't go over 160. I don't have a progauge so I just set it at preset 4 because that seems to give me the best feel.

I have an SCTE coming along with the MIP Pro4 kit and I think I settled on a Copperheard R combo. Would you recommend the R45 or R51?

I was thinking the R45 with 13/40?

I have a 5150 copperhead r in a TEN-SCTE MIP..14 40 love it:D
Hauls BUTTTTTTTTTT!!!!!!!!!!!!!!!!!!!

https://sphotos-b.xx.fbcdn.net/hphot...56141900_n.jpg

Gus, the R45 is a great choice for a lot of different track sizes. The R51 needs some space to open its legs and really run. I might even think about starting at 12 - always easier to go up if you need more than run too hot, too soon. Always watch temps when you start with a new set up!!

Took the e-buggy off the self to clean the cobwebs off to get it ready to race in 3 weeks at amain hobbies.
http://i726.photobucket.com/albums/w...ps8b849b42.jpg
http://www.amainhobbies.com/Tracks/upcoming-events/

When are the 8th scale motors going to be released? I didnt see anything on the website about them today!!!

I should have an update next week, when I have info I am allowed to release, I will;)

Onroad 17.5 Blinky
 

Hi
Have now run my vtx 10B 4 times in the above class
Very pleased but I am finding the brakes very poor.
Motor = 17.5 tekin almost full timing
FDR =3.2
Handset M11x
I have the pro gauge but not the pc lead
Any help / advice would be great
A55 Firmware
Brake strength 100%. (Sorry I suppose this would have helped lol)

List your firmware and settings please so we can assist. You can get all of that from Pro Guage.

Hi bob
Have put what I remember (not allowed car in house at night)
I have altered speed but until tomorrow I can't check

That's fine. We just don't want to start giving you advice without knowing the facts :)

If you don't a reply, send one of us a PM (me, Nick, or any other team driver). It is getting close to race day so we tend to be away from the thread a little more.

Thanks bob
Will do it in the morning myself and my mates are racing
This weekend too.
When ever you get the chance
Thanks again
( as I'm quite new I think it's me rather than the esc)

make sure you disable the active braking.