Hi Bob,

Looking on the dealer listing page on the Viper website there is no dealers in Florida. However there are a few shops in Ontario - http://www.viper-rc.com/viper_canada.html

Hope that helps!

Team Viper's first year on the race circuit, Team Viper's first ROAR national title!

Factory driver Brian Eady wins 2wd buggy 17.5 by taking the TQ through a tie breaker and running away with the first two a-mains to claim the overall title. Brian's VTX10 esc and VST 17.5 ran cool and fast all week to provide the race winning horsepower. Congratulations Brian!

http://www.facebook.com/pages/Viper-...80029898734232

Yesterday I ran the 1800kv motor again and result is FAIL! Mikes Hobby shop onroad and offroad track were used.

Runs too effin' hot man. 170F running half a pack is not exceptable. I had to ease on the brakes and throttle to get to 150F. Was like granny drivin' in loserville county. I had more fun driving a 1512 1400kv 4pole motor. Sensor board on the motor is toast as well. My son's 2 pole C50L 1800kv Hacker has more power/excelleration and runs way cooler. There was another Viper motor on the offroad track and that one also ran stupid hot.

Just like the LRP Vector 8 motors, these 1/8 Viper 3 slot 2 pole motors are no good for 1/8 vehicles. However they would be great motors in 2s and 3s Slashes with Turbo enabled on the esc's.

Hopefully improvements will be seen with new rotors.

Snellemin, what speed control (and settings), as well as gearing were you using? All that can make a difference in how hot the motor runs, as well as how much power and RPM it has.

Let us know some information so we can help you with the product.

My settings are posted here ->2385

Next up will be dropping timing to 0 degrees and play with gearing.

This is the vehicle.

Gearing seems a bit high - even if just running up and down the street that seems to be pushing the envelope. Especially if you are just running at full throttle for long periods of time.

Also, not sure about Tekin 1/8 speedo settings, throttle freq, boost(if available) would make a difference. just my thoughts.

Do you guys forsee any problems using the VTX10R with the new Tekin pro4?

I'm sorry to say, but 39mph gearing for an onroad track is slow. You can't even compete in a real race.

As a company you want your product to win races, for more sales. Not sit on the sidelines waiting to cool off, while the other motors are back on the track.

Or better yet when will you be releasing a 4 pole sct motor similar to the new tekin pro 4 ?

Look what i found on YOUTUBE

Oh I know one exists, I'm just wondering how long till the masses willl have a crack at em . Salad is putting it through it's paces at that indoor track.

Some things you may want to try...those LRP motors pull a lot of amps...set the timing down to the 5-10 degree range. Also, turn the brake throw on your radio as low as you can get it and still get the necessary brakes for the track. The other thing is to check the trannys and belt tensioners and make sure you dont have a bearing going...The team guys were having trouble grenading 540 motors in those trucks due to the drivetrain. Yeah I know I am a Losi guy but I get a lot of info from the other teams here and I really am trying to help as I run for Viper as well. For longevity, you really want to try to get comfy with a 550 motor in that truck.

I was at the track with Snellemin and I have to agree. I'm running a 1600KV Viper in a Team-C T8E 1/8 buggy and I feel the motor is lacking. I like Viper and I think 1/10 stuff is awesome so I was excited about the new 1/8 motor but it's a disappointment. The motor runs hot and lacks any real torque needed for 1/8 buggies. If I gear down and/or change ESC settings to lower the temps, then it's REALLY slow... if I gear up and/or change ESC settings for a bit more speed it starts to run hot... pushing the 160-170F range, but either way it just doesn't have enough torque for 1/8 off road racing. I can't just burp the throttle for short jumps, I need to mash the trigger and get a running start. Also, it doesn't have enough torque to keep the nose up over jumps.

The motor would be AWESOME for a short course truck especially since it's extremely smooth through the whole trigger. Unfortunately it's lacking for 1/8.

Anyone want to buy a Viper 1600kv motor... for a short course?

-Dean

Yea, it seems to be sweet. I was driving during this video. Motor has what an sc needs. Its a 540 with the nuts to run the losi which as many know isnt really the lightest truck. Look forward to this motors release. Smoother than the castle 1410 but has plenty of power.

Agreed, very exciting either way