Tamiya Championship Series
Tech Lord
iTrader: (26)
did someone mention overcharging?
Tech Elite
iTrader: (61)
Will there be a contingency when a control tire gets a flat spot/air gap?
Tech Elite
iTrader: (32)
Tech Elite
Tech Elite
iTrader: (3)
Yeah... That's about the same temps I was measuring.
On the subject of mini foams. I've assembled them in the past with the included 'insert tape' never had a real issue. I guess when you are doing hundreds at a time a few may slip thru speedily.
On the subject of mini foams. I've assembled them in the past with the included 'insert tape' never had a real issue. I guess when you are doing hundreds at a time a few may slip thru speedily.
Tech Elite
iTrader: (2)
With all this talk and worry about rule bending and charging you would think there's a trip to Japan on the line. Oh wait....
See you guys in a few weeks. Coming down for some fun as always at Tamiya and see some old friends. 20th Anniversary wow, I think I started somewhere around the 3rd or 4th.
See you guys in a few weeks. Coming down for some fun as always at Tamiya and see some old friends. 20th Anniversary wow, I think I started somewhere around the 3rd or 4th.
Tech Master
iTrader: (1)
Controlled tire issues!
Contingency? Well, I suggested each racer in the mini class build their own tires on Friday, the day before the race. That was my suggestion to Fred, but no decision has been made.
Fred does read these posts so if you have a concern, post it and that may guide him on what can be done for the race.
As for B3's in Gt-1 and Gt-2 I'm also suggesting buggy grip, tire glue and tools to trim the center seam on the tires if you so desire in the tech area, again on Friday before the race. That way it won't create delays on race weekend.
Just my 2$
My understanding is that they don't glue the foam ends together!
Contingency? Well, I suggested each racer in the mini class build their own tires on Friday, the day before the race. That was my suggestion to Fred, but no decision has been made.
Fred does read these posts so if you have a concern, post it and that may guide him on what can be done for the race.
Contingency? Well, I suggested each racer in the mini class build their own tires on Friday, the day before the race. That was my suggestion to Fred, but no decision has been made.
Fred does read these posts so if you have a concern, post it and that may guide him on what can be done for the race.
This issue should be 'officially' addressed...
Tech Elite
iTrader: (5)
Tire Sauce for NATS
My opinion on tire sauce for NATS is Paragon FXII. It works better than Buggy grip. It's less affected by track temp and the fumes are FAR less overpowering then buggy grip.
I agree with Oliver. FXII.
Tech Elite
iTrader: (32)
Hey guys just want to double check about the official ruling for the "c" rating at he weekends TCS race at Jackson? Is there a limit or not? The rule book posted on the Tamiya Website does not indicate any limit? But I know John was discussing a limit with Fred. Just went back 5 pages and could not find an official post. Thanks and can't wait for Jackson.
Tech Lord
iTrader: (3)
Good luck to everyone going to Jackson this weekend!
Tech Elite
iTrader: (7)
TCS race Sunday at Jackson
Gates open at 8:00 am
First heat at 11:0 am
We are also holding a trophy race sat.
All TCS racers are welcome to run
Cant wait to see everyone.
Gates open at 8:00 am
First heat at 11:0 am
We are also holding a trophy race sat.
All TCS racers are welcome to run
Cant wait to see everyone.
Tech Elite
iTrader: (7)
Here's a list of hotels in the area... 15 min from the track
http://www.hotelplanner.com/Hotels/7...hester-NJ.html
http://www.hotelplanner.com/Hotels/7...hester-NJ.html