![]() |
Originally Posted by cczjordan
(Post 14048113)
I m sure is long lsn. Only SOS will use short. A way to check it is by removing filter boot n wot, observe the lsn edle movement from jet area.
1. With 30%-50% throttle input, lsn pull out completely = short 2. With 90%-100% throttle input, lsn still/out = long Short or long is easy to check, u never know? Wonder how u tune ur engine |
Originally Posted by sn47som1
(Post 14048390)
Neal, can you elaborate on this engine more and make comparisons to previous higher port Novas? crank specs? Thanks
so what I see unique about this engine is that it has a powerband that peaks much earlier then most other offroad .21's, yet still manages to pull power all the way up to 40 000 RPM. At only 20 000 RPM this engine is already making full torque.. which will allow it to pull a lower clutch stall and give a better trigger feel.... It makes similar HP numbers to a OS Speed but peaks about 5000 RPM earlier which means it has much higher torque numbers...Also so far it is showing to be extremely good on fuel... I will offer it in a track tuned format that will operate best on a 41021 manifold using any of 2096,9886,9901 and 9853.....I Will also offer it as a modified... the track tuned will more or less retain the current powerband range, the modified will have the powerband moved up to 25 000 RPM....However with that being said the stock version is quite formidable , especially if you are after a engine with really good tractable grunt..it has lower port timings so the idle is very strong and the tuning quite stable..... All in all for the money its a really sweet engine.... |
So then it sounds like the clocked keep 7 or bonito would be more beast with just as good fuel mileage?
|
Originally Posted by sn47som1
(Post 14051319)
So then it sounds like the clocked keep 7 or bonito would be more beast with just as good fuel mileage?
|
Originally Posted by sn47som1
(Post 14051319)
So then it sounds like the clocked keep 7 or bonito would be more beast with just as good fuel mileage?
SO yes my 7 ports are going to be more aggressive in the midrange and top end, have a more aggressive feel...The 8 port is going to have more grunt and more of a 4 stroke feel to it.. So depends what your are after,,,drag racing down the straight or popping huge air off short run jumps... |
Anyone with experience with the Top Elite 5? How does it compare to say, the P5?
|
Originally Posted by Maximo
(Post 14051915)
I Will not longer be using the moniker " Clocked " to describe my engines.....I am now The Nitro Shop...or TNS.....
SO yes my 7 ports are going to be more aggressive in the midrange and top end, have a more aggressive feel...The 8 port is going to have more grunt and more of a 4 stroke feel to it.. So depends what your are after,,,drag racing down the straight or popping huge air off short run jumps... |
Originally Posted by cczjordan
(Post 14051786)
I'm curious to find out, breakin in a stock paloma 41021/2096 today. I think it is more suitable for truggy
|
Originally Posted by sn47som1
(Post 14052142)
Let us know how it goes compared to other 7 portys. I heard its beast.
|
Elite 5
Originally Posted by Socket
(Post 14051988)
Anyone with experience with the Top Elite 5? How does it compare to say, the P5?
|
Does anyone use the Avid ceramic bearings in their engines?
I kinda want to try them in one of my p5xlt's. They are a hell of a lot cheaper than the Novarossi branded bearings. |
Originally Posted by bash bros
(Post 14053079)
Does anyone use the Avid ceramic bearings in their engines?
I kinda want to try them in one of my p5xlt's. They are a hell of a lot cheaper than the Novarossi branded bearings. But I have had real good luck with the Avids in other parts of all my cars...I wouldn't have any reserves about running them in my engine. And deffinetly a ton cheaper than the Nova bearings... |
Can any gurus pointed out what is the difference between this 2, i can not tell difference in term of performance
TN Team vs bonito/keep off sleeve porting |
Pipe suggestion for p5
Hey guys I got a ? What pipe do u recommend for a p5 with the 15007 crank ? It's for a Losi truggy I ran the 9901 and it feels ok . So just need yalls input I'm trying to decide what pipe to buy next for this p5 . Thanks guys
|
Hello, my p5xlt has almost reached 15liters of use so I decided to have a go at cleaning it internally. Inside the engine it was very dirty. Sort of a crust very black everywhere inside the chamber exept the cylinder wall of course. The head of the piston ans cylinder head were the worst. Is it normal after 15L?
|
| All times are GMT -7. It is currently 07:05 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.