What run time improvements have you seen( if any) using exhaust gas coolers in 1/8 buggy?

Thats ok... many Many Times Monty, in his nice MONTY way, has told me i'm and Idiot:nod::nod::nod: and Im good with that...LOL

But thats why we ask the expert, right:D

When in doubt... LEAN HER OUT


STav

i cant call you an idiot :rolleyes:

you will cut me off :lol::lol:

miss ya bro ,
monty

i just offer advice , if you take it its up to you , if not , well its still up to you :nod:

He told everyone I was an idiot:D

if you say so

OOOOOO is that who he was talkin about :nod::nod:

You called me one today!!! Ya getting old or what:p:D

Ok so ya got OD99T not OD97T, its a simple mistake, one rack apart...LOL ... It is funny since I called myself an IDIOT before i even PROVED I was to ya


LOL

100% for sure on that, stavman


Your advice is easy to take Monty, and you can bet I'll always take it. You know what? It got to bugging me about the high speed needle, when you asked where I had it set. I said I thought it was maybe 1/2 turn in from stock, never said I was wrong just said well usually they should be set about 1 1/2 to 2 turns in. I'll be damed if when I counted to find out, it was 1 1/4 in from stock settings...... http://i685.photobucket.com/albums/v...d37/landry.gif

in a nice way ;)

Any thoughts on this question?

I know Monty is racing Today, and its a 2+ hour drive, so He should be home Late Tonight

Then Im sure he will answer ya bud:nod::nod::nod::nod:

hey houston... is the n21bf a bottom end motor? does it have a lot of bottom end grunt, i need a good bottom end motor for the tracks i run on

haven't really done to much testing with these but i guarantee you will get better mileage and more even pressure from the exhaust with these . i wish jim would send me stuff to test .
happy motorin',
monty

i would be guessing but probably around a 5% increase , plus it is another item to mount under the lid;)

Hey Monty,
What's the best way to get carbon deposits off of a piston and head button?

Hey Monty are the nova plugs good again or are the OD better?
If the nova plugs are back to where they used to be which one works best on the 5kT in California weather?

Shimmed my motor to .8mm and it was flying.