Here's a pic of what you get with the combo set:


You get a whole lot for a killer price!

here's a bigger pic......I hope

bling bling

That is a huge pic !

lol


Re the MG66 engine and MM fuels hitting the USA . The MG66s will be distributed by Trey for Go USA . They will be in your local stores soon but the numbers at this stage are limited . They are selling quicker than the factory can make them !

The A MAin Brand of fuel i produce will be made by my partner in NY and can be shipped all over the US , Mexico , Brazil and Canada . A MAin fuel has hit more national podiums in Australia than both the other major brands put together ! We are a really small company compared to the big boys.. but we do a lot of research and development for our products. The Oils we use are the same oils we use for our F1 and F2 Full Scale Race Boats ! So its gonna be sweet in your engine and give you the best possible performance and protection avail ! Not saying its better than other fuels avail in the US because there are some great fuels avail there ! But its been designed and tested on animals ! ( my race team ) And its survived and in fact been victorious !

Below is the label we will be using for the US fuel brand and some pics of the F1 and F2 boat we sponsor her in OZ .

If you have any questions at all please make me your first port of call


www.massivemods.com.au


Cheers MM

Oops i forgot the pics !

NICE! How much $$$, and what's included in the box?

are you kidding?

I think that the pipe combo. The engine only package includes everything u see except the pipe, manifold, gaskets and springs

No I'm being totally serious.

I heard that a spare rear bearing was included and was curious if this was the case.

Dunno in the US but massivemod do offer some package (MG66 only) that includes the rear bearing even with ceramics that comes in a set (front & rear)

With this combo you'll get: Motor,EFRA 2072pipe,Header+gaskets,T3 Turbo Plug,Spare Con Rod for after break in,4pcs Venturi set(it looks like 3 but one is in the motor already), and a head shim.......Plus as an added bonus and you act now! I'll throw in some snazzy Go Decals and break in procedure paper work. Just kiddin, that's already in the box too.
As far as price goes, I currently have the 5-port listed @ $265.00 as kinda a early bird special. My quantities are very limited already but I do have a GX3 and GX5 as well still.
www.tntprohobbies.com

My check out isn't completely finished on the site yet so just call me direct and I'll get you taken care of.

i think you will find only the MG66 come with a spare bearing
killer prices for sure
but these babies are the Go mate for sure

my mg66 ceremic combo is on its way cant wait to thow it in the xray
I heard that there is a youtube video with someone doing a dyno on this engine anyone got the adress?
cheers

mate you will love it the mg66 is awsome havnt run it yet with ceramics yet..
the run is so much easier than the older Go engines i put one tank in mine then through it on the ground figure 8 for another 5 then race tuned after 4 days of racing the state titles i pulled it down inspected sweet as put the ceramics in and a new conrod and boxed it up ready for its next adventure
just you tube massive mods and i think you will see the vidio clip you are after mate

I'll be dyno testing all the GO engines very shortly, hopefully a MG66 makes it up here for testing as well !

when you dyno engines what exactly are you testing for , are you testing with differant venturies pipes and air filters ? i have always wondered this i would like to have a dyno for my self but they are not cheap at all