R/C Tech Forums - Go-Tech Engines Thread

Thanks, we had a great time, too bad he broke in buggy in warmup, he qualified 3rd. I'll try to get some vids up soon, here's one with the helicopter http://www.youtube.com/watch?v=VJSU2trPUak

Rex

MassiveMods

09-08-2009 09:03 PM

Quote:

Originally Posted by matrixmike28 (Post 6317591)

I meant anywhere I can get a 5port piston/sleeve and rod IN STOCK right now????

we have them in stock , the price includes free world wide shipping

cheers MM

KendallWelch

09-08-2009 11:59 PM

Quote:

Originally Posted by Paperman 90 (Post 6318999)

Hey Rex tell your son good job i saw him race on rclive over the weekend he did good with that GO Power

Thanks man. Motors ran great for the most part all weekend.

mattwoodcraft

09-09-2009 03:46 AM

Quote:

Originally Posted by bigmatt (Post 6318267)

You have no idea how lucky you are to have massive mods.

yea mate we are :D

looking forward next week get to run in my new mg66:sneaky: and take it out and race it to victory :nod:

Poltro

09-09-2009 05:49 AM

Quote:

Originally Posted by 22Racer (Post 6318635)

Loosen the pinch bolt screw a couple turns, lightly tap on the screw until it pushes the pinch nut out the other side, take all the way out. Turn the carb the direction that the remaining part of the pinch bolt is. (if it's on the right turn the carb right) it should break loose fairly easy, be careful not to overtighten when putting back together.

For 30% I use one silver and one thin brass shim, they come with 2 brass. You have to be very careful not to get dirt in the motor when taking the head off.

Rex

Thanks for the prompt answer! As I believe a can get shims of any thickness,what`s the thickness of the silver shim?

Answer-RC

09-09-2009 07:22 AM

Quote:

Thanks for the prompt answer! As I believe a can get shims of any thickness,what`s the thickness of the silver shim?

Silver is quoted at 0.3mm

As an aside - has anyone fitted the Go 2072 pipe to a MBX6 which is fussy about manifold size due to the extreme lack of space... If so how was it? Any images?

Pete

malik

09-09-2009 12:23 PM

22racer can I get down for 1 of those 5.5mm restricters.

Tabushi

09-09-2009 08:16 PM

Well guys,

I just got notified from the factory ... we have new and fresh air coming from GO Factory to USA users :

http://i221.photobucket.com/albums/d...e-usa_soon.jpg

Dont ask me WHO IS because i dont know lol !! (i have an idea, but im not sure).

Official announcement will be published in a couple days, hope that this is good news for most people around GO Engines in USA.

cya !!

stu541

09-09-2009 08:42 PM

excellent!!

bigmatt

09-09-2009 08:49 PM

YEAH! :eek:

leapinglizard

09-09-2009 08:51 PM

Quote:

Originally Posted by bigmatt (Post 6324219)

YEAH! :eek:

MG for me and a MG66 for you cant wait hehehe
:tire::tire::tire::tire::tire::tire::tire::tire::t ire::tire: