R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Offroad Nitro Engine Forum (https://www.rctech.net/forum/offroad-nitro-engine-forum-157/)
-   -   Go-Tech Engines Thread (https://www.rctech.net/forum/offroad-nitro-engine-forum/177028-go-tech-engines-thread.html)

Jason Halvorson 01-01-2008 01:22 PM

Rocket42 give me a call when you have a few minutes...

TMizzle 01-01-2008 01:23 PM

lol. thats funny.
Funny you should ask, I just talked to Russell and it will be on its way to you tomorrow. You may have one more after that in the next week or so... im trying to go to the atlanta race in full force and fully modded! :)

You think a for sure 10 min is possible with the .25 in truggy? I know Mario Knox was getting like 12 with his PTM 7port.

nik77356 01-01-2008 01:25 PM

what kinda mileage does the 3port get?

Rocket42 01-01-2008 01:34 PM

With a restrictor and a smooth throttle finger, you should be able to get 10 min. pit stops on a 3port turbo engine.

nik77356 01-01-2008 01:38 PM

8mm? 9mm? 10 minutes is way better than the 5 or 6 i have been getting

mugenb46 01-01-2008 01:39 PM

closer to ten is what i would think for the .25, and i know mario has his 7 running a 6mm restrictor and the ninja pipe. I will be in atlanta also we can meet up and maybe visit one of the joints that your newspapers seemed to be plastered in LMFAO:lol: Mario should be in for that right, i hear he likes them hefty LOL

mugenb46 01-01-2008 01:41 PM


Originally Posted by nik77356 (Post 4027175)
8mm? 9mm? 10 minutes is way better than the 5 or 6 i have been getting

you will get that out of the 3 ports with the right pipe and restrictor, the one at out track was getting 8 easy with a JP2

TMizzle 01-01-2008 01:41 PM

LMAO!!!!!!!
Yeah, Mario likes his restrictors small and his women large... but ironicly he likes them working at Subway... :lol:

nik77356 01-01-2008 01:43 PM

i think my pipe is an OFNA 086 or 053, i cant remember which

kamlooper 01-01-2008 01:44 PM

Russel, can you give us any updates on the 3 port spec motor? Also is the price the same as the 5+7 ports?

Rocket42 01-01-2008 01:49 PM

Jason Pm

kamlooper no updates yet, the price will be less than the 5 or 7 ports, street price should be around $180 :sneaky:

mugenb46 01-01-2008 02:10 PM

LOL thats funny stuff there

dgraham225 01-01-2008 03:14 PM

are there any GO engine stickers, other than the racefactor stickers?i may get some made instead i guess...

revo_race 01-01-2008 03:19 PM


Originally Posted by TMizzle (Post 4027144)
You think a for sure 10 min is possible with the .25 in truggy? I know Mario Knox was getting like 12 with his PTM 7port.

That's what I'm hoping for. I'm only seeing about 6 minutes out of my .28 right now. The carb inserts are on their way so I'll get to test those out and also I'm going to play with different clutch bells and spur gears. When the .28 dies I was hoping to replace it with a .25 and be able to get roughly 9 or 10 minutes out of it. If I can see 8 minute tanks with the .28 on my track I'd be really happy.

kamlooper 01-01-2008 03:28 PM


Originally Posted by dgraham225 (Post 4027415)
are there any GO engine stickers, other than the racefactor stickers?i may get some made instead i guess...

When you buy an engine theres stickers in the box.


All times are GMT -7. It is currently 12:38 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.