R/C Tech Forums - Go-Tech Engines Thread

well assuming the photos are accurate they have the new engines..and yes these are being sold with 6,7,7.5 and 8mm carb inserts a turbo plug and a spare rod for after the run in/2 gallon mark...

Can't imagine they are selling older engines with the new photos from the GO site..I saw these on the Go site but they don't list any prices..As Mark at massive says the MG66 arrives tomorrow I guess the other new motors will be in shops as well....

gligoco

08-04-2009 09:32 AM

I'm the go tech dealer from Brazil, and I already received some GX5-R engines. I took some picture of the engine internal... But I can't put here, because there is a minium number os posts that I need to have, to start to posting pictures on the forum...

:(

Gizmatron

08-04-2009 10:04 AM

Quote:

Originally Posted by gligoco (Post 6159919)

if it's small enough to attach to an email send it to me at [email protected] and I'll post it....

And bugger bugger stripped the first gear on my hitec steering servo...Took 3 years abuse to kill it though..So it's spare in and order more bits..sigh!

gligoco

08-04-2009 10:51 AM

Quote:

Originally Posted by Gizmatron (Post 6160048)

Email sent, Thank you!

Gizmatron

08-04-2009 11:52 AM

5 Attachment(s)

Quote:

Originally Posted by gligoco (Post 6159919)

OK photos below...

Tabushi

08-04-2009 11:56 AM

Quote:

Originally Posted by gligoco (Post 6159919)

Marco Aurelio ... nooossaaa ara que legal que voce ja tenha os novos motores !!!

Even when im factory for GO, i still dont have the new engines, im stuffed for the rest of the year so no need into get new ones :( ...

cya !!

malik

08-04-2009 12:04 PM

That is awesome there is no need for a mod job on that mill. It looks like its modded already. The crank and sleeve look much nicer than the previous 5 port. I am gonna have to get a 5 I guess no 7 for me again LOL, Maybe even another 3.

bigmatt

08-04-2009 02:35 PM

Quote:

Originally Posted by gligoco (Post 6159919)

so what are they selling for? what's your web site?

RETRO RC

08-04-2009 02:49 PM

Quote:

Originally Posted by malik (Post 6160480)

why no 7 it'll look exactly the same except for the porting on the sleave.

oh well each to their own:D

j_blaze14

08-04-2009 03:18 PM

what is the coating on the crank? except for the crank and head that looks like my grenade, they have been out almost 6 months. great motors.

RETRO RC

08-04-2009 03:31 PM

Quote:

Originally Posted by racer-007 (Post 6158480)

hmmm

well the cooling heads look the same to me so hopfully a pic will come up lol

so can anyone tell me what gen this is im going to use it as a spear as my gen5 5 port is nearly broking in

like everyone has said thats a gen 4 head

hears some better pics of a gen 3
http://www.amainhobbies.com/product_...-Cylinder-Head

and gen4

http://www.amainhobbies.com/product_...er-Head-Orange

the gen5 heads are the same as the gen 4 except for the engraving on the top.

I'm pretty sure that all the gen4 engines that came into NZ had a serial # so it maybe an earlier model with a gen4 head (might explain why it's on side ways:lol:)but I could be wrong:lol:

adrian

RETRO RC

08-04-2009 03:38 PM

Quote:

Originally Posted by RETRO RC (Post 6151005)

as far as I'm aware they come with the venturi set and a plug now.. no extra rod ( but if they do that would be good) and they have been comming with venturies since the carb with the red logo (first of the 5.5) started being used.

All I know is I can wait to get my hands on them:D

:blush:Have to appologise to Rex (Racer22) as they definately come with a spare rod :blush:

:Dstill can't wait to get my hands on 1:D

Adrian

All times are GMT -7. It is currently 01:42 PM.

Page 540 of 1009

540