Community
Wiki Posts
Search

Serpent 710

Thread Tools
 
Search this Thread
 
Old 05-12-2004 | 09:35 PM
  #10336  
Tech Fanatic
iTrader: (2)
 
Joined: Jan 2003
Posts: 787
From: Melbourne, FL
Default

Originally posted by InitialD
What tires are you using? Offset ones?

Which roll center are you using? UBO/LB? I believe you would need to tighten the top rear pivot ball to the max and then set the rear camber / toe in. The minimum trackwidth I measured was 197 mm I believe. If you have different left and right rear camber, your top rear pivot ball would be screwed in differently.

If you still cannot get to the rear trackwidth, then just get the most minimum that you can get. Watch the rear dogbones. Make sure that it does not bind.
Ellegi white spoked rim and Yes...I am using UBO/LB. I can get it to 199mm but that has the top smashed together....will that affect it at all?
kreidel is offline  
Old 05-12-2004 | 09:37 PM
  #10337  
Arun's Avatar
Tech Fanatic
 
Joined: Jun 2003
Posts: 753
From: GA
Default

Originally posted by InitialD
That's a sleek paint design ! Bravo. You come out with the best alternative bodyshell designs.
Originally posted by rwisejr
Nice paint job dude I like the layout.
Why thank you!
Arun is offline  
Old 05-12-2004 | 09:46 PM
  #10338  
Arun's Avatar
Tech Fanatic
 
Joined: Jun 2003
Posts: 753
From: GA
Default

Originally posted by hudy
i think that all the snakes will get tamed by the new v one rrr
Hey man, if you want to bash the serpent all day, thats fine...just start a new thread. Meanwhile, let us talk about setups, parts, women, and other areas of true interest.

I am becoming annoyed, not just at the repeated comments, but at having to filter out all of the unneccessary posts when reading this thread.
Arun is offline  
Old 05-12-2004 | 10:15 PM
  #10339  
Wap
Tech Adept
 
Joined: Apr 2004
Posts: 133
From: Houston, TX
Default

Originally posted by InitialD
You're planning to race there too?
Wap is offline  
Old 05-12-2004 | 10:25 PM
  #10340  
Wap
Tech Adept
 
Joined: Apr 2004
Posts: 133
From: Houston, TX
Default

Originally posted by hudy
i think that all the snakes will get tamed by the new v one rrr
Hey Hudy for someone who is still wet behind the ear as for as R/C you talk a lot of Stuff.
Wap is offline  
Old 05-12-2004 | 10:46 PM
  #10341  
InitialD's Avatar
Tech Prophet
 
Joined: Feb 2002
Posts: 19,679
From: MORDOR
Default

Originally posted by kreidel
Ellegi white spoked rim and Yes...I am using UBO/LB. I can get it to 199mm but that has the top smashed together....will that affect it at all?
The top pivot balls should not smash together with the top arm. Else, they will bind.

I'll go home and check. I remember I got it at that trackwidth. What rear camber do you run?
InitialD is offline  
Old 05-12-2004 | 10:57 PM
  #10342  
Pit-racer's Avatar
Tech Elite
iTrader: (4)
 
Joined: Aug 2001
Posts: 2,373
From: Cali/Texas
Default

Originally posted by InitialD
OS carbs? Why? I think they are they smallest carbs. Not enough for Nova based engines.

STS carbs are close to ideal because STS engines work about the same as Nova engines. But one thing I found about STS carbs are that they are composite and not aluminum like Nova.
True. I will be testing w/ a nelson plug this weekend, instead of the turbo.
Pit-racer is offline  
Old 05-12-2004 | 11:00 PM
  #10343  
Tech Fanatic
 
Joined: Mar 2003
Posts: 783
Default

Originally posted by InitialD
The top pivot balls should not smash together with the top arm. Else, they will bind.

I'll go home and check. I remember I got it at that trackwidth. What rear camber do you run?
Just as a note.
I use UBO/LT with 4 deg rear camber, must cut the top arm almost 1.5mm to gain 199mm trackwidth (with GQ tires)
GoldFinger is offline  
Old 05-12-2004 | 11:10 PM
  #10344  
Tech Fanatic
 
Joined: Mar 2003
Posts: 783
Default

Originally posted by Pit-racer
True. I will be testing w/ a nelson plug this weekend, instead of the turbo.
So bigger carb, bigger power ?
GoldFinger is offline  
Old 05-12-2004 | 11:10 PM
  #10345  
InitialD's Avatar
Tech Prophet
 
Joined: Feb 2002
Posts: 19,679
From: MORDOR
Default

Originally posted by GoldFinger
Just as a note.
I use UBO/LT with 4 deg rear camber, must cut the top arm almost 1.5mm to gain 199mm trackwidth (with GQ tires)
Oh yes. Forgot either Pyramid or yourself posted that setup mentioning that...

UBO / LT gives a pretty high rear roll center. How do you like it?
InitialD is offline  
Old 05-12-2004 | 11:37 PM
  #10346  
BaxterC's Avatar
Tech Fanatic
 
Joined: Feb 2004
Posts: 801
From: Johannesburg, South Africa
Default

Originally posted by Sow&Steady
Ah, that means you created your own personal album and uploaded them there!
You are right Mr Steady, I setup my own Album and put in two pit babes, but, forgot to put in my mechanic, he is a bit clumsy at times.
BaxterC is offline  
Old 05-13-2004 | 12:21 AM
  #10347  
Diesel Racer's Avatar
Tech Adept
 
Joined: Jun 2003
Posts: 227
From: UK
Default

Originally posted by hudy
i think that all the snakes will get tamed by the new v one rrr
Trouble is people complain about Serpent updating their cars regularly but in 2 months time that v one rrr will be a v one rrrr!
Diesel Racer is offline  
Old 05-13-2004 | 12:44 AM
  #10348  
Sow&Steady's Avatar
Tech Elite
 
Joined: Dec 2003
Posts: 4,104
From: Va Va Voom!
Default

Originally posted by InitialD
You're planning to race there too?
No lah, there's a trip coming up so why not check the local LHS out right?
Sow&Steady is offline  
Old 05-13-2004 | 12:51 AM
  #10349  
BaxterC's Avatar
Tech Fanatic
 
Joined: Feb 2004
Posts: 801
From: Johannesburg, South Africa
Default Re: Re: Nice shell

Originally posted by Diesel Racer
Cheers Voodo_Magic, it's Tamiya PS-41 Bright Silver.
Hey Diesel, This is one SWEET car...
BaxterC is offline  
Old 05-13-2004 | 12:51 AM
  #10350  
Sow&Steady's Avatar
Tech Elite
 
Joined: Dec 2003
Posts: 4,104
From: Va Va Voom!
Default

Originally posted by JustRace
How's this for a pit babe? She's got that snake in her hands.

http://www.mytsn.com/publ/psimage.as...=10074&psid=10


Just how we want them to be ... as long as they don't race against us !?*#
Sow&Steady is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.