|
Originally Posted by gotmotor
(Post 12429954)
Where's the Like button:nod::D you coming to the Nats
|
Kyle mugen or capricorn 1/10th?
They got kyle branson listed as running capricorn! He's mugen right??
|
No Kyle is now running a Capricorn with IDM power
|
Originally Posted by gotmotor
(Post 12429954)
Where's the Like button:nod::D you coming to the Nats
|
Originally Posted by nitrodude
(Post 12459530)
The east coast boys are afraid of our track:sneaky:, but they're missing out. Its actually an pretty awesome track:nod:
I'm gonna miss out but I at least it was for a worthy cause good luck at the nat's https://www.facebook.com/photo.php?v...type=2&theater |
just posted this on aussie for sale site
will send O/S http://www.rctech.net/forum/australi...ine-mount.html |
Selling
Selling a lightly used MTX-5 with the 4mm chassis and 1 piece motor mount here:
http://www.rctech.net/forum/r-c-item...l#post12481914 |
Originally Posted by jeromakazi
(Post 12108012)
I've had inconsistent steering since I built the car. When I would set-up my car I would have turn the wheel left or right then back to neutral and come up with a different toe measurements. I first thought it was my servo, but after reading posts regarding the servo saver problems "some" people encountered, I ordered an aluminum one. So far, my toe measurements have been consistent.
What's the part # and brand for the aluminum servo saver? |
1 Attachment(s)
Originally Posted by Evo 13
(Post 12505663)
What's the part # and brand for the aluminum servo saver?
|
Originally Posted by Evo 13
(Post 12505663)
What's the part # and brand for the aluminum servo saver?
http://www.rc-mushroom.com/product_i...x-3pcs-p-23695 There's also a A-plus one out. http://www.a-plusrc.com/index.php/pr...ervo-saver-set |
Originally Posted by jeromakazi
(Post 12507119)
I have the CSO version.
http://www.rc-mushroom.com/product_i...x-3pcs-p-23695 There's also a A-plus one out. http://www.a-plusrc.com/index.php/pr...ervo-saver-set |
What's the difference between the front blue and gray springs if they are both 1.8?
|
ha ones blue ones gray if they are different colours they shoud be different or are we being got at hows racing going at home NITTO we have nats in a coupel of weeks so its a bit quiet no won wants to where out cars
greg |
Grey is harder.
1.8 is the diameter of the wire but that is only one of several different things that determine a spring's rate. |
Grey is harder,ok thanks!! Can't wait to try them!!
|
| All times are GMT -7. It is currently 08:25 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.