![]() |
One thing that has been left out of Peck's setup is the 2.0mm sway bar. It doesn't come in the kit. You have to order it.
If you try this setup with the 2.3mm sway bar it will just spin out if you look at it funny. Casey said not to even try the setup without the rear sway bar. Also, stock rear springs. 42.5wt oil in the front with a 54 piston. And the rear droop comes down to 127mm as well. If your not using the whole package you may as well keep the "Truhe" setup on the truck. This setup does make the truck drive smiliar to the buggy but it is more sensitive and easier to spin. Some people like the extra rotation and some don't. I do. Especially when I can just drive under the other Losi's around me. Hope this helps you guys out.:nod: |
Originally Posted by cdbias
(Post 6502856)
One thing that has been left out of Peck's setup is the 2.0mm sway bar. It doesn't come in the kit. You have to order it.
If you try this setup with the 2.3mm sway bar it will just spin out if you look at it funny. Casey said not to even try the setup without the rear sway bar. Also, stock rear springs. 42.5wt oil in the front with a 54 piston. And the rear droop comes down to 127mm as well. If your not using the whole package you may as well keep the "Truhe" setup on the truck. This setup does make the truck drive smiliar to the buggy but it is more sensitive and easier to spin. Some people like the extra rotation and some don't. I do. Especially when I can just drive under the other Losi's around me. Hope this helps you guys out.:nod: |
yea i agree..i dont like my droop that low ither...he stated the droop doesnt HAVE to be so low..
i forgot all about the 2.0 sway bar..thanks for bringing that up.. |
Can someone tell me if they've come across some Losi 8ight T 2.0 set up sheets? It might be available in this thread but 300+ pages is a little hard to follow.
Cheers! |
Originally Posted by likemelong
(Post 6503274)
Can someone tell me if they've come across some Losi 8ight T 2.0 set up sheets? It might be available in this thread but 300+ pages is a little hard to follow.
Cheers! |
Originally Posted by reggie l.
(Post 6503042)
yea i agree..i dont like my droop that low ither...he stated the droop doesnt HAVE to be so low..
|
Originally Posted by reggie l.
(Post 6503287)
losi has some on there site
X2...pick a set-up....try it and tweak from there....if all goes to hell...go back and try another.....Losi's are Imo Very Set-up friendly. |
what method do you guys use for measuring your droop?
thanks |
You measure the distance between the center of the upper shock mount and the center of the lower shock screw with the vehicle's tires off the ground using calipers or a ruler in mm.
Here is a video of Adam Drake checking the droop on a 8ight 2.0 http://www.youtube.com/watch?v=H99PKqsUZjA |
thank you:nod:
|
|
i think it looks bad ass. just wish is wasnt 2speed trans
|
new shock towers
Does anyone have the part # for the new shock towers ?
|
Originally Posted by miket3
(Post 6511476)
Does anyone have the part # for the new shock towers ?
|
Originally Posted by losi_racer
(Post 6507212)
i think it looks bad ass. just wish is wasnt 2speed trans
Originally Posted by Losi Website
(Post 6507212)
LOSB3570 48T Center Spur Gear and Screws: 10-T.............................4.99
|
| All times are GMT -7. It is currently 09:46 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.