R/C Tech Forums

Well, I have stripped the whole lot down and sanded the discs again and also roughed up the metal calipers as they looked very smooth. I also reset the screws as per Losi's recommendations, so I'll have to see from here I guess.

The fuel tubing on the actuators seems to be very hard though. I have had to adjust me EPA right down now, the servo hardly moves and I have some serious braking again.

keep note that they will fade initially once they "seat" in so make sure to double check after a quali or couple laps of practice. :nod:

losi_racer

10-02-2009 12:58 PM

Quote:

Originally Posted by Frank L (Post 6419900)

I have been using those since they were released and so far they are more consistent than the stock brakes.

ive been looking every day to see if they are in stock i want them

TIX	10-03-2009 12:13 AM

i ordered 3 sets from carolinas rc back on the 16th of August and i have only received 1 set so far. its been nearly 2 months.
Im so pissed off its taking so long.
i could have got them local already but i dont want to end up with a heap of spares

Integra

10-03-2009 07:03 PM

Cool....a new box.

http://www.neobuggy.net/modules/news...p?storyid=7002

Frank L

10-03-2009 07:33 PM

Quote:

Originally Posted by losi_racer (Post 6420780)

ive been looking every day to see if they are in stock i want them

You snooze you loose...

JPKinsella

10-03-2009 08:23 PM

Has anybody used the new 12 degree alum. caster blocks from losi. If you have what's the word better or worse?????

Integra

10-03-2009 09:14 PM

Quote:

Originally Posted by Integra (Post 6424970)

Cool....a new box.

http://www.neobuggy.net/modules/news...p?storyid=7002

Booo Erns.....Neo buggy stated the box to have 775 motor's.....Losi site claims 775 motor......so Which is it i wonder ?

Also on a side note....No more 550's for the original boxes....590's now

http://losi.com/Products/Features.aspx?ProdId=LOSA99418

vlad_vy

10-04-2009 02:02 AM

1 Attachment(s)

One 775 motor

Integra

10-04-2009 11:15 AM

Quote:

Originally Posted by vlad_vy (Post 6425877)

One 775 motor

almost went that far as to check the part's list.....but thought i would let some one else field it.....Thx vlad. :)

JPKinsella

10-04-2009 12:18 PM

Any opinions on the 12 deg caster blocks yet??????????????

T0MM0

10-04-2009 01:38 PM

Quote:

Originally Posted by token (Post 6416055)

What do you mean you only got 20 min out the center?

Oil is black/dark grey and seems like 3k instead of 10k.

Hellsavage

10-04-2009 02:12 PM

Quote:

Originally Posted by JPKinsella (Post 6427181)

Any opinions on the 12 deg caster blocks yet??????????????

I think it is more made for the 8B 2.0. I whould not want any less stirring the I currently have in the 8T 2.0.
Also the L8 will benefit I think.

JPKinsella

10-04-2009 08:44 PM

I thought the Idea of the 12 deg caster was for more mid corner steering and faster corner exit speed with more rear traction. not less steering?????????:weird: