3LikesXray T1
06-22-2004, 11:33 PM
#7516
Tech Addict
Join Date: Jul 2003
Location: If Nissan Motorsport is Nismo, Then Honda Motorsport must be Homo
Posts: 633
Originally posted by Manfredo
I think they just used it to get enough steering with a spool up front (remember that one-ways were banned at the reedy race).
0° Caster with 0° kickup would be undriveable with a front one-way...
I think they just used it to get enough steering with a spool up front (remember that one-ways were banned at the reedy race).
0° Caster with 0° kickup would be undriveable with a front one-way...
06-23-2004, 04:02 AM
#7517
Tech Regular
actually greg and i both ran 1.5 kick and 0 caster at the speedworld cup with one ways and it worked well
so definitely sometihng to play with
so definitely sometihng to play with
06-23-2004, 08:14 AM
#7518
How did you guys do up there?
06-23-2004, 10:00 AM
#7519
Tech Adept
T1 Set up
Thanks John, Ill set it up as that way then. What tire are you running? 
06-23-2004, 10:16 AM
#7520
Tech Master
Join Date: Apr 2003
Location: Built By The Racers For The Racers. Corona CA
Posts: 1,307
I have been running CS27's. They were hooked up at Sundays race. Howard was using Sorex 36 with a medium insert yesturday and his car felt good too. I would say stick with the 27s though.
06-23-2004, 10:31 AM
#7521
Tech Elite
Originally posted by R/C HEAT
I have been running CS27's. They were hooked up at Sundays race. Howard was using Sorex 36 with a medium insert yesturday and his car felt good too. I would say stick with the 27s though.
I have been running CS27's. They were hooked up at Sundays race. Howard was using Sorex 36 with a medium insert yesturday and his car felt good too. I would say stick with the 27s though.
06-23-2004, 11:17 AM
#7522
Which race was this?
06-23-2004, 01:01 PM
#7523
Tech Initiate
Hey everyone, I have one question. Whats the best way to measure droop on the rear arm. I noticed that my droop screws are sliding inward as I put pressure on the arm. Is that normal. Thanks to all
06-23-2004, 01:16 PM
#7524
Tech Adept
Help!!!
Im looking for the set up on the T-1 at the Reedy Race and I can't Find It can any one help. Thanks
06-23-2004, 01:32 PM
#7525
Tech Master
Join Date: Apr 2003
Location: Built By The Racers For The Racers. Corona CA
Posts: 1,307
Originally posted by Neil Rabara
Which race was this?
Which race was this?
06-23-2004, 01:33 PM
#7526
Tech Fanatic
John,
I just logged on to Cyrul's Site that John G. told you about and it has the set-up for the Reedy race 2004, Check it out.
Also go to RC HEAT.com to check the link that John added, It TOO COOL!!!!!!!!!!
I just logged on to Cyrul's Site that John G. told you about and it has the set-up for the Reedy race 2004, Check it out.
Also go to RC HEAT.com to check the link that John added, It TOO COOL!!!!!!!!!!
06-23-2004, 01:50 PM
#7527
Tech Regular
06-23-2004, 02:06 PM
#7528
Tech Fanatic
Whats Up Andrew,
When are up going to come up and run at the track?
Changed the track direction and added a sweeper at the end of the straight. We will see how it works out.
See Ya,
Scott
When are up going to come up and run at the track?
Changed the track direction and added a sweeper at the end of the straight. We will see how it works out.
See Ya,
Scott
06-23-2004, 02:56 PM
#7529
Tech Adept
Duh, I missed that Part I found it, NOW WATCH OUT !!!!
Thank Again.
Thank Again.
06-23-2004, 02:59 PM
#7530
Tech Fanatic
What? You want someone to build the car for you? Oh ya, you better have someone drive it for you too!!!!