racer

anyone know of a company out there that makes a derlin pulley for the rear diff?

you can see it on Satoshi's 415 in the last issue of RC Magazine.

JDM_DOHC_SiR?!? would you know anything about it?

Thanks in advance!

grooveman

Corally proudly announces that current EP 1:10 TC World Champion Surikarn Chaidajsuriya has recently joined Team Corally. Surikarn chooses the Corally SP12M Tube-Damper kit to compete at the upcoming 2004 World Championships in Florida. He joins Chis Tosolini, Sakke Ahoniemi and Simo Ahoniemi in Team Corally to race for top honours at the 1/12th World Championships in October 2004.

alan1467

From what I've heard it's only for the 1/12th scale CAR for the worlds he's still with Tamiya and Peak for the rest

Rick Draper

Also in the pics on the corally site there is no motor and cells in the 1/12 he is holding to prevent a conflict of interests which means he aint running corally cells or motors. Rick

gcooper

I was wondering if anybody could post the bearing sizes that come in the 415 kit, as well as what they are for. I am in the process of getting a 415 and would like to play around with a set of ceramics. I do have a bunch of option parts coming in including 2 - lightweight arm kits coming.

I am looking to build it with everything I am getting in instead of piece at a time.

Thanks in advance,

Coop

Turbonium

iTrader: (27)

well, the diffs are (4) 10x15, the center/spur shaft uses (2) 4x8's, and the wheels are 5x9's, eight of course.

i think the steering uses 4x8, not that they need ceramics there! i think thats it...

V12

iTrader: (1)

wheel bearings in 5x9 are for the new suspension. The 415 kit suspension uses 5x11 wheel bearings.

Turbonium

iTrader: (27)

thats true.. i forgot. but... he was saying he got the LW set, too... s

Obsidian

iTrader: (10)

Greetings everyone,

Has anyone had problems with play in the holes of the alum rear uprights where the hinge pins go thru? shimming seems to do little to get rid of the play. any ideas or suggestions welcome.

cheerz

gcooper

Thanks Tamiyadriver and V12.

That helps a lot. Yeah, I will not worry about the steering bearings.

What does the Flanged qty2 - 630 bearings do?

Coop

Turbonium

iTrader: (27)

steering link.. carbon piece that links the two steering arms..

gcooper

Gotya...

JDM_DOHC_SiR

iTrader: (31)

Think Yokomo MR4TC

-Dave

forty6

But the Yoke pulley is only 33T compared to the 35t of the 415, right?

Arun

Does anyone know where I can find alluminum or delrin front 4 deg. c-hubs (hub carriers) for the 414/415 (old suspension)?