Tamiya TRF416 / TRF416WE / TRF416X
#9706
Tech Master
iTrader: (8)
As I suspected the roll centres are completely different, -1.1mm for scenario A, -0.73mm for scenario B, so scenario 1 would also roll more in addition to having more camber gain.
Roll centre calculator:
http://www.rctech.net/forum/5382752-post4285.html
http://www.thard.co.uk/viewtopic.php?f=24&t=145
Roll centre calculator:
http://www.rctech.net/forum/5382752-post4285.html
http://www.thard.co.uk/viewtopic.php?f=24&t=145
Changing roll center via the camber link is very different than the suspension blocks. Raising/lowering the blocks makes very large changes, while altering camber link angle makes a relatively small difference. Here is a drawing I made that illustrates this...
BTW: You may also notice that raising the upper link lowers the roll center, while raising the suspension blocks raises roll center...
BTW: You may also notice that raising the upper link lowers the roll center, while raising the suspension blocks raises roll center...
Thanks guys! You gave me what I was looking for and then some...
#9707
Tech Regular
any one have setup from IIC of marc rheinardīs car and geardiff?
#9708
Tech Elite
iTrader: (47)
are these the blue/white springs most you are using on carpet? Thanx
http://www3.towerhobbies.com/cgi-bin...?&I=LXWB01&P=Z
http://www3.towerhobbies.com/cgi-bin...?&I=LXWB01&P=Z
#9709
#9712
Tech Master
iTrader: (8)
#9714
Setup
Does anyone have a good carpet setup for the 416X with the Tamiya Lipo upgrade chassis?
#9716
Tech Fanatic
iTrader: (17)
I have a few questions:
How much better is the Lipo chassis that Tamiya makes for this?
Some have mentioned flipping the pulleys, is that possible with the stock chassis? Is the purpose of flipping the pulleys to accommodate the wider lipo battery and improve balance? Is it necessary for someone like me who is getting back into on-road after a 20 year hiatus?
My plan is to run RCGT at West Coast. 911 body, Ballistic 21.5 with a Novak Havoc Pro speed control...will the Havoc fit alright?
Do I have to run a shorty steering servo? Any recommendations?
How much better is the Lipo chassis that Tamiya makes for this?
Some have mentioned flipping the pulleys, is that possible with the stock chassis? Is the purpose of flipping the pulleys to accommodate the wider lipo battery and improve balance? Is it necessary for someone like me who is getting back into on-road after a 20 year hiatus?
My plan is to run RCGT at West Coast. 911 body, Ballistic 21.5 with a Novak Havoc Pro speed control...will the Havoc fit alright?
Do I have to run a shorty steering servo? Any recommendations?
#9718
Yes Braaah
Jaco handout
Jaco handout
#9720
Tech Elite
iTrader: (16)
both fit well into 416x.
3racing gdiff have slop and can be fix with adding 2pcs axle type shim 0.2mm x 2pcs while spec-r gdiff is leaking but can b fix by replacing with latest o-ring..
so the choices is yours...
SPec-r Gdiff
3racing Gdiff
3racing gdiff have slop and can be fix with adding 2pcs axle type shim 0.2mm x 2pcs while spec-r gdiff is leaking but can b fix by replacing with latest o-ring..
so the choices is yours...
SPec-r Gdiff
3racing Gdiff