|
Originally Posted by derbrylac
(Post 10035298)
What's a good way to get rid of the clicker noise from hard breaking? I know its the clicker and I've tightened the spring all the way down but it still clicks from hard breaking.
Thanks, D |
Originally Posted by symmetricon
(Post 10035304)
it is most likely your belt slipping... dial your breaks down until the sound goes away
D |
Originally Posted by vito
(Post 10011911)
iam saveing up for this truck what do i need to know and what parts to get?
Originally Posted by vito
(Post 10012179)
i had a lhs here had a fire long story. iam on a set in come and need a place on line to get parts from. iam thinking team rpp hobby how are they. and i use a pre pay visa card
Originally Posted by vito
(Post 10012507)
whats the pin mod ?
Originally Posted by vito
(Post 10012622)
i found it is it need to just bash?
Originally Posted by vito
(Post 10013246)
whats a good motor for this truck i have mmp esc and like to keep it for this kit. and i dont race an it will be ran on 2s or 3s lipo pack.
Originally Posted by vito
(Post 10013287)
ty can i get a link to that motor an i have 5700 kv 4 pole 2 try out to
Originally Posted by vito
(Post 10013306)
i have a s3s pack and its a 3300 and the same size as my 2s one
Originally Posted by vito
(Post 10013373)
will my 4 pole 5700 kv work?
Originally Posted by vito
(Post 10013577)
hows the 3800 one for this kit
Originally Posted by vito
(Post 10013982)
thanks ill get the kit now and run my mmp esc with a 2400 kv set up ty:sneaky::sneaky:
Originally Posted by vito
(Post 10014321)
will this kit hold up to a 2400kv and mmp esc on 3 s lipo?
Originally Posted by vito
(Post 10015890)
wheres a good deal on the kit. my lhs had a fire and i like to buy it from rpp hobby?
Originally Posted by vito
(Post 10016623)
iam on my way to wallmart to get one got to put money on my card
Originally Posted by vito
(Post 10017575)
whats all pre built in the kit and what to look for ty?
Originally Posted by vito
(Post 10017680)
i can live with that. ill re do them
Originally Posted by vito
(Post 10017714)
http://teamassociated.com/pictures/p...4/91054_md.jpg
what are the small 1 2 clips for i dint see the in the book?
Originally Posted by vito
(Post 10017735)
thanks i do like this kit a lot wheres pay day ill pick one up from rpp
Originally Posted by vito
(Post 10018079)
what do i need to pick up to start my kit ?
Originally Posted by vito
(Post 10018104)
is the savox 252 mg be fine to use?
Originally Posted by vito
(Post 10018160)
good ??????
Originally Posted by vito
(Post 10018289)
how hard are the sway bars to mount up ?
Originally Posted by vito
(Post 10018315)
thanks they come with paper work lol
Originally Posted by vito
(Post 10018327)
thank you all the guys fro the help now. iam saving up for this kit and right now iam at 70 bucks on monday i hope to have a 100 . and by the frist of the year.
Originally Posted by vito
(Post 10019570)
i look at the book and dint see a page with the bolt size and nuts they use.
Originally Posted by vito
(Post 10019764)
my set up for this kit i have a savox 252 servo a dx3c radio and mamba max pro esc and a better motor to get?
Originally Posted by vito
(Post 10020861)
will this kit run ok with a mmp esc and a what 540 motor till i get some more money?
Originally Posted by vito
(Post 10021069)
is wiil be my frist belt dive car what do i need to look out for ant tips with the belt drive set up?
Originally Posted by vito
(Post 10021487)
what diff and shock oil do i pick up ?
Originally Posted by vito
(Post 10022795)
with my mmp esc can i run the new reedy motors fine?
Originally Posted by vito
(Post 10023096)
how the kit set up out of the box and i just bash and ill get sway bars too run.
Originally Posted by vito
(Post 10024715)
can i send in my kit to be done from rpp jk lol
Originally Posted by vito
(Post 10024930)
where do i buy hop ups from?
Originally Posted by vito
(Post 10025061)
thanks i have a ? whats the slipper basket do.
Originally Posted by vito
(Post 10025366)
thanks i will just bash this kit and do i need it ill just lock down the nut
Originally Posted by vito
(Post 10025793)
where did you guys buy one from?
Originally Posted by vito
(Post 10033934)
got some money saved up where to get a kit at on line
Originally Posted by vito
(Post 10033972)
i got to go retail i need a new kit
Originally Posted by vito
(Post 10033997)
my lhs had a big fire so iam got to buy on line
Originally Posted by vito
(Post 10034096)
i got a pre payed visa card
Originally Posted by vito
(Post 10034366)
thanks i not useing pay pal
Originally Posted by vito
(Post 10034859)
how much will shipping be at a main. i like to use rpp hobby and dose tower hobby shipp out of nv as iam i roseburg or
Originally Posted by vito
(Post 10035002)
thanks ill try rpp or a main now
Originally Posted by vito
(Post 10035099)
iam going to get it from a main now ty guys
Originally Posted by vito
(Post 10035154)
will i need the brace as i just bash?
Originally Posted by vito
(Post 10035186)
is it hard to put on?
Originally Posted by vito
(Post 10035289)
ok this will work one brace an lock the slipper down for a basher set up
|
Lol
|
quick ?
just purchased my sc10 4x4, what is the most needed spare parts for this truck
|
Slipper pads. LOL
|
thanks
that sounds like a good plan:)
|
Originally Posted by Kbmoss
(Post 10035220)
not if you buy one from coyote, I made my own from Cf tube and a traxxas turn buckle set.
Hey Coyote, I think I should get a royalties check for dropping your name for business (I don't make any money off the braces. If I did i'd go mantis and make more parts. :p) And Vegatron: :nod::nod: |
Originally Posted by goshjottstein
(Post 10035473)
just purchased my sc10 4x4, what is the most needed spare parts for this truck
|
Originally Posted by Farmer_John
(Post 10031375)
You are trying to compare a mature chassis, to a chassis still in it's infancy.
For example, I built an RC8Be recently. other than raising the rear links a hole, taking away some front droop and going to the longest wheelbase, it was darn good out of the box. On the other hand, my SC104x was just a huge POS out of the box. It was a struggle not to give up on it and it's pretty good now. Just keep things in perspective. I have started running VTA at my local parking lot, with my old XXX-S G+ sedan. Fresh out of the box from the last time I ran it in 2003! I seriously put the radio gear in it and blew off the dust, I didn't even change the shock oil! But a little off - about .2 second a lap. So I went back and started reading the 800+ page thread, and remembered all the stuff other guys were trying back then. TL developed that chassis almost all the way to the end. Reading that thread reminds me of this one, except I could just skip to the end if I wanted to.
Originally Posted by Vegatron75
(Post 10035331)
Some quality stuff here, wouldn't want any of this to get lost in the mix....
|
Originally Posted by goshjottstein
(Post 10035473)
just purchased my sc10 4x4, what is the most needed spare parts for this truck
http://www.rctech.net/forum/9084333-post1.html If you decide to run a 540 motor, you'll need a Yeah Racing fan. If you decide to run a 550 or a four pole motor, you'll need a slipper upgrade. Either the Mac The Knife slipper basket, or the Mantis garodiscs. I have not broken anything in this truck, nothing, not once. |
http://img804.imageshack.us/img804/2112/brokeshaft.jpg
Sad Panda. 'night all. Edit: It's a good/bad thing hardly anyone needed pinned setups from me. I have an asinine amount of Rear Topshafts sitting in my box. :p |
FYI Everyone:
A-main Horizon Hobby Tower Hobbies ALL are doing free shipping over $99.00 till the 15th or so. Edit: Just realized Horizon doesn't matter for this truck... But... meh. |
Originally Posted by Grouchman
(Post 10033061)
The bolts are lighter, but you don't want to take weight off the truck, you need to add more weight. I don't know about everyone else, the Losi trucks can push an SC10 4x4 out out the way very easily. Spend the money on Mantis new center diff, Coyote's chassis brace, Exotek chassis, or something that will make the truck run better.
|
Originally Posted by symmetricon
(Post 10033214)
You can pre order the center ball diff at
rcshox.com |
| All times are GMT -7. It is currently 08:02 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.