oh yeah your right thats why i ended up watching the video (it was late lol). in the AE video on youtube he greases the idler gear .

If you remove the shock boots, what do you use to limit up travel?

i disagree if you saw the toe setting on it you would understand what i mean . i dont think using those outter holes for the camber link would have helped the toe settin that much either way i was able to adjust it to work really well and im happy with it now .Rick

Anyone running a castle 2 pole motor? Like a 4600?

If not, im looking to get into one of these trucks, and im trying to stay on the less expensive side right now.

Is the castle sct 4 pole the way to go if I dont want to spend alot?

Yup.

belt tension holes??
 

All the photos and descrition on the belt tensioner has "holes" for the screw going through tensioner to mount, well mine does not have "holes" but a slot, is any one elses like this, or is this just a imaginary hole along the slot all are refering to, thanks all.

Here's the sway bars I made for mine using .062" (1.58mm) rod, traxxas, axial, and associated parts :D

http://i443.photobucket.com/albums/q...e/0f6c965a.jpg

http://i443.photobucket.com/albums/q...e/1061601f.jpg

Yes, I think there are notches or indents or somthing. They aren't really visable but you can feel it when you slide the tensioner up and down.

Thank you for the reply, that is what I was thinking, just wanted to see what others say, since all my research shows no holes anywhere, mag., online, manual, ect.

Anyone know what size bearing you need for the FT Blue CVD retainers. They won't fit with stock bearing.

Has anyone tried using an RC8 swaybar and hardware for the SC10 4x4?

You should have got a bunch of small plastic clips in the shock parts bag. My understanding is these are used to limit up travel. If you remove the boot be sure and retain the rubber bumper.

You can get a good setup cheap. castle 1410/ hobbywing SC10 ESC
motor
http://cgi.ebay.com/Castle-Creations...item43a72737b6
esc
http://kershawdesigns.com/
check out their section of electronics under hobbywing, the sc10 esc is 69$, and the sc8 esc is 79$, and hobbywing speedos are bulletproof!

Thank you; do you know how many to use on each shock?

Grrrrr
 

Savox sc 12558tg wire fits with plenty of room. I was sent 2 front and 2 rear shocks and upon teardown to fill realized there were 3 yes three rear springs and only 1 shorter front spring. :flaming:
What do I do, they don't sell the spring kits yet rite?
JT