Thanks.

Do you have a picture of how you mounted them? The AE weights wont fit horizontally into the triangle part on the chassis.

Sup everyone, I haven't driven my FT SC10 in awhile since I've been running my 4x4 and trying to get that dialed in. I finally had a chance to take my 2wd SC10 to the track earlier today and I guess I just got spoiled by my 4x4 and how it steers. Any good tips setups to get the best steering/handling for my 2wd? I run on an indoor tight clay track with my hobbywing 60a esc and trinity 13.5 motor...... So any and all information will be greatly appreciated, I will be entering my first race with it in about two weeks so would like to try to get it dialed in before then........... Thanks

Airland?

??

Nevermind. I saw SoCal and tight indoor track so I assumed Airland


If you need a lot of steering run

Front: Blue/35W/3 Pistons
Rear: Green/35W/1 Pistons

I run reds up front but if you need more steering put the blues. All the other links/ cambers go by how you like.

Looks like Kinwald is hard at work :weird: are those big bores or just Losi springs :rolleyes: And he has modded the chassis in some way also...


http://events.redrc.net/event-galler...own/?nggpage=4
http://events.redrc.net/event-galler...own/?nggpage=5
http://events.redrc.net/event-galler...own/?nggpage=5
http://events.redrc.net/event-galler...own/?nggpage=5

Oh ok lol I figured you were talking about a track but wasn't sure...... I'll try that setup thanks and try both red and blue springs just to see which one works best.......

Thx guys. I checked and the diff gears were slightly worn. Also the 3 screws mount from gear cover to motor plate were about 1.5 turns lose. Factory didnt use locktite!

I ordered a diff rebuild kit hope that solve it.

Just Losi springs, and he is always trying new stuff....

Need help with new SC10RS. I'm not used to LRP electronics, when I turn the switch on it twitches the steering alittle to the right and nothing else happens. No light on the ESC either. I'm used to Castle ESCs so I guess I'm alittle confused on why this is happening. Any help would be nice. Thanks

got my sc10 over a year ago, working and tuning ever since. Got the brushless, savox, just got cvds, and i thought i might as well start posting. Right now i am planning on installing a speed passion cirtixshort course esc and short course motor, alluminum rear arms, calipertires, and then time to start racing! I will update soon, might get new brushless by endof the year.

http://events.redrc.net/wp-content/g...waldsc10-2.jpg

Anybody know what rod ends BK is using here?

It looks like Traxxas slash rod ends.

They are off the sc10 4x4 truck.

Maybe. The ball studs are different...