![]() |
Originally Posted by KidAgain
(Post 5994216)
;)
:D The expert that can do it in less then 10 minutes :smile: Hope it lasts longer than that :eek: Just bustin your balls Matias. Oh yeh, Goosebumps sucked in the main at OCRC. I borrowed a pair and couldn't even get around the track without spinnin out. I suggest borrowing a pair to try before you buy em. I'm hearing good stuff bout the Proline Bowties though. I'm gonna ask to borrow a pair to try. |
got ? about the gt2 parts... what is the benefit of doing this mod? also i have ran both goosebumps and bowties on this trk and they are awesome.. goosebumps worked ok in dry but the bowtie m3 worked better and a friend of mine ran the m2 bowties and looked like it hooked up good also in dry thnx Will G
|
Team Associated SC10 is the 2009 ROAR National Champion
|
Originally Posted by bcrazy
(Post 5997488)
Team Associated SC10 is the 2009 ROAR National Champion
|
Originally Posted by will g
(Post 5997089)
got ? about the gt2 parts... what is the benefit of doing this mod? also i have ran both goosebumps and bowties on this trk and they are awesome.. goosebumps worked ok in dry but the bowtie m3 worked better and a friend of mine ran the m2 bowties and looked like it hooked up good also in dry thnx Will G
|
Originally Posted by KidAgain
(Post 5997910)
Congrats on the beatdown of the other brand :D :tire:
|
Originally Posted by R40Victim
(Post 5999499)
Was there any doubt? :sneaky: With similar equipment, the SC10 weighs about 6 ounces lighter. However, even with the "Perceived" advantages, they're still very comparable based on the limited traction. ;) At our last race, a Slash won, and nearly put a lap on 2nd place... an SC10. :D
|
Originally Posted by F N CUDA
(Post 5999727)
Put a dialed SC10 in that Slash drivers hands. Might be different?
|
racing
How long are mains where you race at?
|
10 minutes. With the very low amp draw that the stock motors and 13.5 brushless systems have, even a 3000 mah nimh can make run time. ;)
|
Racing
Originally Posted by R40Victim
(Post 5999802)
10 minutes. With the very low amp draw that the stock motors and 13.5 brushless systems have, even a 3000 mah nimh can make run time. ;)
|
Originally Posted by RcRacing4Ever
(Post 5999858)
Thanks man...Hmmm we run 10 here also in the stock class.. I think my batts are toast cause of the fact I dont have nothing at the last 3 laps...Im running a Sc10 with XL10 speedo with Slash 12T Titan motor with a lipo 4900 track power ( butter bar as I call it .. lol). Im coming off at 110 on the speedo & 120 -130 on the motor, geared @ 18/87... BUT I have the Sc8 tires & rims..do u think running those rims & tires is pulling to much power from the batts & thats y Im so weak in the end? Thanks in advance
|
Originally Posted by RcRacing4Ever
(Post 5999858)
Thanks man...Hmmm we run 10 here also in the stock class.. I think my batts are toast cause of the fact I dont have nothing at the last 3 laps...Im running a Sc10 with XL10 speedo with Slash 12T Titan motor with a lipo 4900 track power ( butter bar as I call it .. lol). Im coming off at 110 on the speedo & 120 -130 on the motor, geared @ 18/87... BUT I have the Sc8 tires & rims..do u think running those rims & tires is pulling to much power from the batts & thats y Im so weak in the end? Thanks in advance
Slash Switch with Proline wheel 135g Slayer Switch on sc10 wheel 115g Bowties on sc10 wheel 95g Goosbumps on sc10 wheel 85g I would bet the sc8 are a bit heavier. |
Originally Posted by rapster402
(Post 5998008)
adds 1.5 deg toe in on the back... heaps more forward bite and rear traction in general.. i run this and the M2 bowties and its a dream to drive now
|
Originally Posted by will g
(Post 6001774)
so what parts do i need to do this mod??
|
| All times are GMT -7. It is currently 12:36 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.